孝感摩托车科目四英语试题

1. When passing through a tunnel, the wrong measure is to ___________.

A. Keep safe distance when two vehicles cross each other

B. Driving with the low beam light

C. Use the hight beam light when two vehicles cross each other

D. Overtaking in the tunnel

Answer: CD

2. Speeding up to go though the intersection before the light turns to red in this case.

A. Right

B. Wrong

Answer: B

3. When a fast-running vehicle makes a sharp turn, it can very easily cause side collision or an overturn due to the centrifugal force.

A. Right

B. Wrong

Answer: A

4. When passing a turn or a curve section, the driver should slow down and disengage the clutch.

A. Right

B. Wrong

Answer: B

5. The main impact of muddy roads on safe driving is that the wheels may easily spin and skid

A. Right

B. Wrong

Answer: A

6. When approaching a vehicle on a narrow slope, which one of the following ways is correct?

A. The descending vehicle yields to the ascending

B. The vehicle which is further from the slope crest should yield

C. The ascending vehicle yields to the descending

D. If the descending vehicle has reached the midpoint while the ascending vehicle has not yet set out, the descending vehicle must yield.

Answer: A

7. What is the meaning of this sign?

A. No long time honking

B. Honk discontinuously

C. Reduce speed and honk

D. No honking

Answer: D

8. Which of the following is a bad habit when changing lanes?

A. Turning on the indicator in advance

B. Observing closely before changing a lane

C. Change lanes at will

D. Not obstructing the passing of other normally moving vehicles

Answer: C

9. When driving in icy and snowy weather, ________.

A. The tires can easily spin

B. The braking distance becomes longer

C. The tires can easily drift

D. Vehicle handling becomes more difficult

Answer: ABCD

10. While driving a motorcycle, it is permitted to keep one hand on the handlebar but not allowed two hands leave handle bars at the same time.

A. Right

B. Wrong

Answer: B

11. Which will affect the stopping distance?

A. Pavement conditions

B. Driver’s reaction time

C. The quantity of cargo and the structure of brake, etc.

D. The vehicle speed

Answer: ABCD

12. What is the meaning of this sign?

A. No entry for bicycles

B. Lane for non-motorized vehicles

C. Special lane for bicycles

D. Bicycle stopping area

Answer: B

13. When passing an intersection, vehicle motor drivers are not allowed to overtake.

A. Right

B. Wrong

Answer: A

14. The drivers, loaders and supercargoes responsible for dangerous chemicals transportation should all full understand the chemical characteristics, potential risks, features of the packaging containers and emergency measures for any unexpected accidents.

A. Right

B. Wrong

Answer: A

15. Driving a motor vehicle in the downhill section of a mountain road avoids overtaking as much as possible because _______.

A. Vehicle resistance in downhill section is very high

B. Vehicles on downhill sections are more difficult to control than on flat roads due to gravity.

C. In downhill section, the front speed is faster and it is difficult to overtake.

D. Vehicles on downhill sections tend to be too fast due to gravity

Answer: BD

16. Whats the meaning of the white horizontal solid line in the circle?

A. Turning waiting line

B. Deceleration line

C. Yielding line

D. Stop line

Answer: D

17. Before driving, it is necessary to check whether the cooling liquid, engine oil and fuel oil, are leaking.

A. Right

B. Wrong

Answer: A

18. What should be done by the driver who intends to overtake but finds that the vehicle in front is also overtaking?

A. Following the vehicle in front closely and finding a chance to overtake it

B. Accelerating to overtake forcefully

C. Continuously sounding the horn to urge the vehicle in front to yield

D. Refraining from overtaking and letting the vehicle in front overtake first

Answer: D

19. When a motor vehicle temporarily stops at night, which lamp should be turned on?

A. Front and rear fog lamp, clearance lamp and rear position lamp

B. Head lamp, clearance lamp and rear position lamp

C. Hazard lamp, clearance lamp and rear position lamp

D. Reverse lamp, clearance lamp and rear position lamp

Answer: C

20. Under such circumstances, what should be done by motor vehicle drivers in order to yield to the pedestrians politely?

A. Set off after pedestrians pass

B. Set off and bypass in front of the pedestrians

C. Sound the horn to warn the pedestrians to yield

D. Set off and approach the pedestrians slowly

Answer: A

21. When a tire blowout on the road, the driver should control the direction of the vehicle and use emergency braking to bring the motorcycle swiftly to a stop.

A. Right

B. Wrong

Answer: B

22. When a motorcycle turns at an excessively high speed, it can easily dash out of a curve or skid sideways.

A. Right

B. Wrong

Answer: A

23. When a motor vehicle passes over an overflowing bridge, what should the driver do after stopping and observing closely?

A. Change to a high gear and pass rapidly

B. Constantly observe the changes of the flow

C. Prepare to stop at any time

D. Change to a low gear and pass through at a constant speed

Answer: D

24. What is the meaning of this sign?

A. Reducing speed 40m ahead

B. Minimum speed is 40km/hr

C. Axle weight limit is 40 tons

D. Maximum speed limit is 40km/hr

Answer: D

25. What should be done by motor vehicle drivers in order to yield politely to such pedestrians?

A. Speed up and bypass in front of the pedestrians

B. Speed up and bypass from behind the pedestrians

C. Reduce speed or stop to yield

D. Continuously sound the horn to alert the pedestrians

Answer: C