鄂州英文驾考

1. Whats the meaning of this sign?

A. provincial highway No.

B. county road No.

C. township road No.

D. national highway No.

Answer: C

2. When overtaking, the driver should try his best to increase the horizontal distance and,when necessary, may cross the solid line to overtake.

A. Right

B. Wrong

Answer: B

3. Whats the meaning of the double white solid lines in far front of the intersection?

A. stopping and yield line

B. slowdown and yield line

C. left-turn waiting line

D. waiting to run line

Answer: A

4. The wrong measure to avoid tire blowout is to _________.

A. Reduce tire pressure

B. Check the tires regularly

C. Remove objects from tire tread grooves in a timely manner

D. Replace the tire that has cracks or deep cuts

Answer: A

5. Do not hang or place articles close to the front and rear windows that block the vision of the driver.

A. Right

B. Wrong

Answer: A

6. Whats the meaning of this sign?

A. a manned level crossing

B. multi-crossing of railway and road

C. grade separation level crossing

D. an unmanned level crossing

Answer: A

7. Must reduce the frequency of honking in this section.

A. Right

B. Wrong

Answer: B

8. Whats the meaning of this sign?

A. watch for danger

B. bypass from right side

C. bypass from left side

D. one-way pass

Answer: C

9. This sign reminds the lane or the road narrows on both sides ahead.

A. Right

B. Wrong

Answer: B

10. What is the meaning of this sign?

A. provincial highway No.

B. national highway No.

C. county road No.

D. township road No.

Answer: A

11. When following a vehicle, the following vehicle may use the high beam light.

A. Right

B. Wrong

Answer: B

12. Whats the meaning of this sign?

A. Passing on both sides

B. Passing by the right side

C. Passing by the left side

D. Passing is prohibited

Answer: C

13. What should the driver do if conditions permit when a following vehicle gives the overtaking signal on a road without a central line?

A. maintain the original speed

B. speed up

C. reduce speed, move to the right side and yield

D. immediately stop and yield

Answer: C

14. Whats the meaning of this sign?

A. customs inspection

B. stop-for-inspection

C. frontier inspection

D. no passing

Answer: B

15. If a motorized vehicle driver has caused a major accident in violation of the traffic regulations which has caused human death, the driver is subject to a prison term of more than 3 years.

A. Right

B. Wrong

Answer: B

16. This set of the hand signals of the traffic police indicates that the vehicles should ___ .

A. turn left

B. wait to turn left

C. reduce speed and pass slowly

D. turn right

Answer: B

17. Turn on the right-turn signal and return immediately to the original lane afterovertaking.

A. Right

B. Wrong

Answer: B

18. Which part of the driver can be protected by the safety pillow when there is a rear-end collision?

A. waist

B. chest

C. head

D. neck

Answer: D

19. The main impact of the road conditions at night on safe driving is ________.

A. The visibility is low and unfavorable for observing road traffic conditions

B. The road surface is complex and changing

C. The physical strength of the driver decreases

D. The driver can easily have impulse and illusion

Answer: A

20. Whats the meaning of this sign?

A. bypass from right side

B. one-way passing

C. watch for danger

D. bypass from left side

Answer: A

21. When crossing each other on a narrow road, the driver should slow down, yield and stop first.

A. Right

B. Wrong

Answer: A

22. If a motorized vehicle runs 50% faster than the specified speed limit, the driver is subject to a 3-point penalty.

A. Right

B. Wrong

Answer: B

23. When a vehicle follows another vehicle on a mountain road, it should ____.

A. Properly increase the safe distance

B. Closely follow the vehicle in front

C. Properly reduce the safe distance

D. Try to find a chance to overtake

Answer: A

24. This sign reminds the road in front changes to inseparate two ways section.

A. Right

B. Wrong

Answer: A

25. What mark is the inclined yellow and black lines?

A. entity mark

B. protrusions mark

C. three-dimensional mark

D. deceleration mark

Answer: C