海口考国内c1驾照英语试题

1. The light switch is in this position, front fog lights turn on

A. Right

B. Wrong

Answer: A

2. In such road sections, you can enter the cross-hatched marking area to wait.

A. Right

B. Wrong

Answer: B

3. You have the priviledged passing right of way at the intersection in this situation.

A. Right

B. Wrong

Answer: A

4. How to run at this position when leaving the expressway?

A. enter the deceleration lane

B. keep running forward

C. keep the speed at 100km/hr

D. reduce the speed to less than 40km/hr

Answer: A

5. Whats the role of indicative sign?

A. tell the direction information

B. warn danger ahead

C. restrict the vehicles and pedestrians from passing

D. indicate the vehicles and pedestrians to go ahead

Answer: D

6. Whats the meaning of this sign?

A. tunnel entry

B. observatory

C. mind side wind

D. wind vane

Answer: C

7. After starting the engine, it lights to indicate that ______

A. engine main oil way blockage

B. engine oil pressure is too low

C. engine crankshaft box leaks

D. engine oil pressure is too high

Answer: B

8. A motorized vehicle is not allowed to stop in the section 50 meters to the narrow road less than 4 meters width.

A. Right

B. Wrong

Answer: A

9. How to use lights when entering the speed-reducing lane?

A. turn on the hazard lights

B. turn on the head light

C. turn on the left-turn signal

D. turn on the right-turn signal

Answer: D

10. Which kind of sign is it?

A. warning sign

B. prohibitive sign

C. indicative sign

D. directional sign

Answer: C

11. The cycle for recording the accumulated penalty points for violating road traffic safety regulations is ____________.

A. 12 months

B. 24 months

C. 3 months

D. 6 months

Answer: A

12. Whats the meaning of this sign?

A. watch for pedestrians

B. watch for children

C. school area

D. crosswalk

Answer: A

13. The continuously flashing yellow light is to warn that the driver should look and make sure it is safe to pass.

A. Right

B. Wrong

Answer: A

14. It lights to indicate that ______

A. the side fans work

B. air external circulation

C. the front fan works

D. air internal circulation

Answer: C

15. Whats the meaning of this sign?

A. no changing lane

B. no left turn

C. no going straight

D. no U turn

Answer: D

16. How to run if this traffic light continuously flashes?

A. speed up and pass as soon as possible

B. stop by the side to wait

C. look and make sure it is safe to pass

D. apply emergency braking

Answer: C

17. How to run in this situation?

A. stop and yield to the opposite car

B. turn on the left-turn signal and run on the left side

C. turn on the head lights to let the other side yield

D. speed up to bypass the obstacle and then cross the other vehicle

Answer: A

18. When a vehicle enters a two-way tunnel, the driver should turn on ________.

A. The hazard lights

B. The high beam light

C. The fog light

D. The width light or the low beam light

Answer: D

19. How to drive in this section?

A. occupy the road of the other side to pass the curve

B. drive along the middle of the curve

C. speed up and honk to pass

D. reduce speed and honk

Answer: D

20. Whats the meaning of this sign?

A. no left turn

B. dead-end road

C. no passing

D. bypass if overheight

Answer: D

21. Motorized vehicles should pass the intersections according to the traffic signals.

A. Right

B. Wrong

Answer: A

22. The cycle for recording the accumulated penalty points for violating road traffic regulations is ____________.

A. 14 months

B. 12 months

C. 6 months

D. 10 months

Answer: B

23. Whats the meaning of the white solid lines at the edge of the carriageway on both sides of the road?

A. Vehicles may cross temporarily

B. Vehicles are not allowed to cross.

C. Motorized vehicles may cross temporarily.

D. Non-motorized vehicles may cross temporarily

Answer: B

24. Before the motorized vehicle runs on the road, the driver should check the safety and technical performance of the vehicle.

A. Right

B. Wrong

Answer: A

25. When driving at night, the driver should reduce speed and go forward if the vehicle coming in the opposite direction fails to turn off the high beam light. This is designed to prevent an accident from happening when there are pedestrians crossing the place where the lights of the two vehicles meet.

A. Right

B. Wrong

Answer: A