淮北驾考英文版

1. When a vehicle leaves an expressway, it should reduce speed in the deceleration lane before entering the ramp.

A. Right

B. Wrong

Answer: A

2. Whats the meaning of this sign?

A. intersection ahead

B. interchange ahead

C. Y-shaped intersection ahead

D. ring intersection ahead

Answer: D

3. After a tire blows out and before the driver can control the speed of the vehicle, he should refrain from using the foot brake to stop the vehicle. Otherwise, a horizontal swing of the vehicle can cause greater danger.

A. Right

B. Wrong

Answer: A

4. It lights to remind that the driver‘s seat is not adjusted properly.

A. Right

B. Wrong

Answer: B

5. No U turn at this section.

A. Right

B. Wrong

Answer: B

6. Whats the meaning of this sign?

A. expressway mileage No.

B. expressway border plate No.

C. expressway name No.

D. expressway section No.

Answer: C

7. What device does the switch of this symbol control?

A. child safety lock

B. window glasses of both sides

C. electric door

D. door unlock

Answer: A

8. The seat belts can reduce the injury of the driver and passengers when there is a collision.

A. Right

B. Wrong

Answer: A

9. It lights continuously to indicate that ______

A. safety bags work

B. not buckled up

C. ABS system malfunction

D. safety bags malfunction

Answer: D

10. You should speed up to go through the railway crossing in this case.

A. Right

B. Wrong

Answer: B

11. What kind of sign is it?

A. directional sign

B. indicative sign

C. prohibitive sign

D. warning sign

Answer: A

12. How to go straight when encountering this traffic light at the intersection?

A. enter the intersection to wait

B. turn left

C. speed up and pass straight

D. can not exceed the stop line

Answer: D

13. Opening the doors of a motorized vehicle should not obstruct the flow of other vehicles and pedestrians.

A. Right

B. Wrong

Answer: A

14. When a vehicle starts to move, the driver should first turn on the low beam light.

A. Right

B. Wrong

Answer: A

15. It lights to remind that engine oil needs to be filled.

A. Right

B. Wrong

Answer: B

16. When a vehicle encounters a bike rider coming in the opposite direction on the road, the driver should _________.

A. Continuously change the high and low bean lights

B. Continuously honk

C. Use the low beam light, reduce speed or stop to evade

D. Use the high beam light

Answer: C

17. When a vehicle goes uphill, the driver should observe the road conditions and the length of the slope in advance and shift to the lower gear in a timely manner to ensure the vehicle has sufficient power.

A. Right

B. Wrong

Answer: A

18. Whats the meaning of this sign?

A. expressway next exit ahead

B. expressway right exit ahead

C. expressway left exit ahead

D. expressway destination indication

Answer: C

19. How to use lights when pulling over on road?

A. turn on the hazard lights

B. turn on the right-turn signal in advance

C. use the high and low beam lights alternately

D. not need to use any light to indicate

Answer: B

20. It displays that the current temperature of the coolant is 90 degrees.

A. Right

B. Wrong

Answer: A

21. Whats the meaning of this sign?

A. recommended speed in unusual weather

B. minimum speed in unusual weather

C. average speed in unusual weather

D. maximum speed in unusual weather

Answer: A

22. Whats the meaning of this sign?

A. tunnel entry

B. observatory

C. mind side wind

D. wind vane

Answer: C

23. What marking is the combination of the white broken lines and the triangle area?

A. road entry marking

B. lane-dividing line that can be crossed

C. deceleration line at road entry

D. road exit marking

Answer: A

24. When the road maintenance vehicle and the engineering vehicle are on duty, the passing vehicles should avoid with care.

A. Right

B. Wrong

Answer: A

25. When a motorized vehicle goes at night through an intersection that has no traffic lights, the driver should not use the high and low beam lights alternately.

A. Right

B. Wrong

Answer: B