商丘c1驾照英文

1. What marking is the combination of the white broken lines and the triangle area?

A. road entry marking

B. lane-dividing line that can be crossed

C. deceleration line at road entry

D. road exit marking

Answer: A

2. When entering an expressway toll gate, the driver should select a gate where _______.

A. There are more vehicles

B. The red light is on

C. The green light is on

D. Service is temporarily suspended

Answer: C

3. Which is subject to a 12-point penalty?

A. driving a motorized vehicle when driving license is temporarily detained

B. applying for reissuing the driving license by concealment or deception

C. not yielding to the school bus according to regulations

D. running with the license plate deliberately stained

Answer: D

4. As thick fog reduces visibility, turning on the high beam light can increase the visibility.

A. Right

B. Wrong

Answer: B

5. Before the motorized vehicle runs on the road, the driver should check the safety and technical performance of the vehicle.

A. Right

B. Wrong

Answer: A

6. How often should a driver who is more than 60 years old present the certificate of physical conditions?

A. every 3 years

B. every 2 years

C. every 6 months

D. every 1 year

Answer: D

7. This sign indicates indoor car park here.

A. Right

B. Wrong

Answer: B

8. Turn on the left-turn signal in advance when making a U turn on the road.

A. Right

B. Wrong

Answer: A

9. Whats the meaning of this sign?

A. road narrows on the left side

B. narrow bridge

C. narrow road

D. road narrows on the right side

Answer: B

10. When a vehicle merges with the traffic flow, the driver should turn on the turn signal in advance, go straight, observe the traffic conditions on both sides through the rear-view mirror, and merge with the traffic flow if it is safe to do so.

A. Right

B. Wrong

Answer: A

11. The vehicle is allowed to _______ at this intersection.

A. go straight or turn right

B. turn right

C. turn left

D. go straight

Answer: C

12. It lights when turning on the right-turn signal.

A. Right

B. Wrong

Answer: B

13. When a vehicle leaves an expressway, it should reduce speed in the deceleration lane before entering the ramp.

A. Right

B. Wrong

Answer: A

14. Speed up and pass when encountering this traffic light at the intersection

A. Right

B. Wrong

Answer: B

15. Whats the meaning of this sign?

A. streets on both sides

B. main road go first

C. stop to yield

D. one-way road

Answer: B

16. What should a motorized vehicle has while running on the road?

A. a label of keeping distance

B. a label of reminding danger

C. a label of inspection

D. a label of product qualification

Answer: C

17. This motorized vehicle parked on the roadside has no illegal act.

A. Right

B. Wrong

Answer: B

18. What does this symbol indicate?

A. switch of high beam lights

B. switch of the low beam lights

C. master switch of vehicle lights

D. the switch of tail fog light

Answer: C

19. Whats the meaning of this sign?

A. a manned level crossing 50m ahead

B. an unmanned level crossing 100m ahead

C. a manned level crossing 100m ahead

D. an unmanned level crossing 50m ahead

Answer: B

20. It lights to indicate that ______

A. ABS system malfunction

B. handbrake is released

C. braking system malfunction

D. safety bags malfunction

Answer: A

21. When encountering disabled people obstructing the traffic, the driver should voluntarily reduce speed and yield.

A. Right

B. Wrong

Answer: A

22. What marking is the two white broken lines in the circle?

A. stop lines at crossroad

B. left-turn waiting areas

C. U turn guide lines

D. small vehicles turning lines

Answer: B

23. This sign reminds the width of the bridge narrows ahead.

A. Right

B. Wrong

Answer: B

24. According to rules on the road traffic safety, the maximum speed on the expressway is less than 120km/hr, thus, it will not be in violation of the traffic regulations as long as the speed does not exceed 120km/hr on the expressway.

A. Right

B. Wrong

Answer: B

25. What mark is the inclined yellow and black lines?

A. entity mark

B. protrusions mark

C. three-dimensional mark

D. deceleration mark

Answer: C