信阳英文驾考

1. What marking is the white polylines in the circle?

A. ascertaining the distance between the vehicles

B. driving at reduced speed

C. ascertaining the speed of the vehicles

D. reducing the speed at the intersection

Answer: A

2. What is the max speed limit on this road?

A. 100 km/hr

B. 90 km/hr

C. 120 km/hr

D. 110 km/hr

Answer: B

3. How to use light in this situation at the intersection?

A. turn off high beam lights

B. use hazard lights

C. use the high and low beam lights alternately

D. use high beam lights

Answer: C

4. It is a bad habit for a driver to put his left arm on the window of the vehicle or hold the gear lever in his right hand for a long time.

A. Right

B. Wrong

Answer: A

5. When driving on a road covered by ice and snow, the driver must reduce speed and increase the safe distance.

A. Right

B. Wrong

Answer: A

6. How to drive through the intersection without traffic lights?

A. reduce speed and go slowly

B. speed up and pass

C. let large vehicle go first

D. let the left vehicle go first

Answer: A

7. Whats the meaning of this sign?

A. change to right lane

B. branching point

C. road surface becomes wider

D. the number of lanes increases

Answer: D

8. What kind of marking are the double yellow solid lines in the middle of the road?

A. auxiliary marking

B. warning sign

C. prohibitive marking

D. indicative marking

Answer: C

9. What does this symbol indicate?

A. luggage compartment is opened

B. door of one side is opened

C. engine compartment is opened

D. cover of fuel tank is opened

Answer: A

10. When a vehicle goes downhill on a mountain road, it is not allowed to overtake.

A. Right

B. Wrong

Answer: A

11. What pedal is it?

A. clutch pedal

B. brake pedal

C. handbrake

D. accelerator pedal

Answer: A

12. When a vehicle encounters a bike rider coming in the opposite direction on the road, the driver should _________.

A. Continuously change the high and low bean lights

B. Continuously honk

C. Use the low beam light, reduce speed or stop to evade

D. Use the high beam light

Answer: C

13. Which part does it control when rotating this part of the switch?

A. the low beam lights

B. the head and tail fog lights

C. high beam lights

D. turn signals

Answer: B

14. How to turn left at this intersection?

A. along the right side of the center point in the intersection

B. along the left side of the center point in the intersection

C. cover the center point in the intersection

D. can not turn left

Answer: B

15. The rear windshield defroster starts to work after pressing this switch.

A. Right

B. Wrong

Answer: B

16. Whats the meaning of this sign?

A. expressway parking area ahead

B. expressway shelter ahead

C. expressway car park ahead

D. expressway service area ahead

Answer: A

17. Traffic Police can detain the accident vehicle according to law if it needs to be collected evidence of the road accident.

A. Right

B. Wrong

Answer: A

18. Before entering a level crossing, the vehicle should reduce speed and change to a lower gear, and _____ after entering the level crossing.

A. Cannot change gear

B. Can change gear

C. Can change to a higher gear

D. Stop and look

Answer: A

19. If discovering pedestrians abruptly cross the road while driving, the driver should immediately reduce speed and evade.

A. Right

B. Wrong

Answer: A

20. Whats the meaning of this sign?

A. a manned level crossing 50m ahead

B. an unmanned level crossing 100m ahead

C. a manned level crossing 100m ahead

D. an unmanned level crossing 50m ahead

Answer: B

21. When driving at night, the drivers visibility range becomes shorter and his observation becomes poorer. At the same time, the driver can easily become tired because he has to highly concentrate his attention.

A. Right

B. Wrong

Answer: A

22. When a vehicle merges with the traffic flow, the driver should turn on the turn signal in advance, go straight, observe the traffic conditions on both sides through the rear-view mirror, and merge with the traffic flow if it is safe to do so.

A. Right

B. Wrong

Answer: A

23. Before a vehicle enters a curve of a mountain road, the driver ______ if there is no vehicle coming in the opposite direction.

A. Should reduce speed, honk and drive on the right side

B. Should drive along the outer side of the curve

C. May briefly borrow the opposite lane

D. May speed up and pass along the tangent line of the curve

Answer: A

24. When a vehicle changes to the right lane, the driver should turn on the right-turn signal in advance, observe and enter the new lane if it is safe to do so.

A. Right

B. Wrong

Answer: A

25. Whats the meaning of the double white broken lines in far front of the intersection?

A. waiting to run line

B. stopping and yield line

C. slowdown and yield line

D. left-turn waiting line

Answer: C