湘潭科目一英文考试

1. Cannot make a U turn in this section.

A. Right

B. Wrong

Answer: A

2. Whats the meaning of this sign?

A. water channel

B. bridge

C. tunnel

D. Culvert

Answer: C

3. When the motor vehicle installed ABS system brakes, the braking distance will be greatly shortened, so you do not have to keep a safe distance between vehicles.

A. Right

B. Wrong

Answer: B

4. You may speed up to go through the intersection in this case.Answer：

A. Right

B. Wrong

Answer: B

5. The driving license will not be revoked if the person drives after drug taking and injection.

A. Right

B. Wrong

Answer: B

6. Whats the meaning of this sign?

A. T-shaped intersection

B. branching intersection

C. reduce speed to pass

D. dead-end road

Answer: D

7. Change driving license before of expiration.

A. 60 days

B. 30 days

C. 90 days

D. 6 months

Answer: C

8. You should speed up to go through the railway crossing in this case.

A. Right

B. Wrong

Answer: B

9. Driving a small passenger vehicle at 100km/hr on the expressway, the minimum distance from the vehicle in front is _____ .

A. not less than 20 meters

B. not less than 10 meters

C. not less than 50 meters

D. not less than 30 meters

Answer: C

10. When the two red lights at a level crossing flash alternately, the vehicles should stop to wait.

A. Right

B. Wrong

Answer: A

11. Whats the meaning of this sign?

A. Y-shaped intersection

B. T-shaped intersection

C. intersection

D. ring intersection

Answer: B

12. In a vehicle that has safety belts, the driver should request the passengers to buckle up.

A. Right

B. Wrong

Answer: A

13. Whats the meaning of the yellow broken and solid lines in the middle of the road?

A. no crossing the lines on the side of the broken line

B. no crossing the lines on the side of the solid line

C. allowed to cross the lines on the side of the solid line

D. allowed to cross the lines on both sides

Answer: B

14. How to pass the intersection when running straight

A. turn on the hazard lights and pass

B. directly speed up and pass straight

C. yield to the vehicle from the right road

D. yield to the vehicle from the left road

Answer: C

15. This sign warns obstacles ahead and reducing speed to bypass.

A. Right

B. Wrong

Answer: B

16. What marking is the combination of the white broken lines and the triangle area?

A. road entry marking

B. lane-dividing line that can be crossed

C. deceleration line at road entry

D. road exit marking

Answer: A

17. How to do while entering this intersection?

A. shift the high and low beam lights alternately to remind the cars already in the intersection to yield

B. quickly cut in the cars already in the intersection

C. let the cars already in the intersection go first

D. honk and enter directly

Answer: C

18. Whats the role of indicative sign?

A. tell the direction information

B. warn danger ahead

C. restrict the vehicles and pedestrians from passing

D. indicate the vehicles and pedestrians to go ahead

Answer: D

19. When a vehicle reaches a sharp curve, the driver should _______.

A. Brake suddenly and go slowly

B. Drive along the outer side of the curve

C. Fully reduce speed and drive on the right side

D. Go forward by borrowing the opposite lane

Answer: C

20. Whats the meaning of this sign?

A. yield if going to turn left

B. straight one-way road

C. right one-way road

D. left one-way road

Answer: D

21. What causes the rear-end collision?

A. not observe through the rear-view mirror while the vehicle in front brakes

B. the vehicle in front brakes suddenly

C. distance from the vehicle in front is too close when the rear vehicle overtakes

D. not maintain a safe distance from the vehicle in front

Answer: D

22. Whats the meaning of this sign?

A. no honking the tweeter

B. no honking the woofer

C. should honk

D. no honking

Answer: C

23. May throw items to the road while driving.

A. Right

B. Wrong

Answer: B

24. What marking is the triagle filled area in the circle?

A. stop line

B. deceleration line

C. guide line

D. cross-hatched marking

Answer: C

25. 7.When a vehicle changes lane before an intersection, the driver should do so ______.

A. In the area marked by solid lines before the intersection

B. In the area marked by solid lines in the intersection

C. In the area marked by broken lines as indicated by the guide arrow

D. Before the stop line at the intersection

Answer: C