常州2026年摩托车科目四英文题库345题

1. After setting off from the roadside, motor vehicle drivers should speed up as soon as possible and make a sharp left-turn in order to drive into the normal lane.

A. Right

B. Wrong

Answer: B

2. What should motor vehicle drivers do when approaching an oncoming vehicle on a frozen road?

A. Cut speed as approaching each other

B. Pass each other by speeding up properly

C. Pass each other slowly by cutting speed in advance

D. Pass each other along the central line to the best

Answer: C

3. When driving on a rough road, the driver should use low gear to keep low speed; try to choose roads with big pits to reduce bumpy feeling.

A. Right

B. Wrong

Answer: B

4. When a motor vehicle reaches a muddy or burst-and-muddy section of the road, the driver should stop, observe and select a level and solid section or a section with vehicle tracks.

A. Right

B. Wrong

Answer: A

5. Under such circumstances, motor vehicle drivers should stop and yield

A. Right

B. Wrong

Answer: A

6. When a rear tire of a motorcycle blows out, the driver should ________.

A. Swiftly turn the steering handlebar to adjust

B. Firmly hold the steering handlebar with both hands

C. Swiftly turn the steering handlebar to the opposite direction

D. Swiftly take braking measures

Answer: B

7. When rescuing a wounded person who has been poisoned by toxic gas, the first measure is to send him/her to a place with fresh air so that he/she will not continue to be poisoned.

A. Right

B. Wrong

Answer: A

8. When a vehicle approaches an intersection without crosswalk, the driver should _______ if he finds people are crossing the street.

A. Reduce speed or stop to yield

B. Honk to indicate them to yield

C. Pass before the pedestrians

D. Immediately change lane and bypass the pedestrians

Answer: A

9. When driving on a muddy roads, it is easy for wheels to sideslip or skid, which leads to traffic accidents.

A. Right

B. Wrong

Answer: A

10. Which of the following is a safe way for motor vehicles to pass the intersection marked with this sign?

A. Stop and observe the traffic situation around the intersection

B. Approach the intersection by speeding up

C. Observe the traffic situation on the left rear side

D. Approach the intersection at a reduced speed

Answer: D

11. How to ensure motor vehicles have sufficient power when driving uphill?

A. Downshift before reducing speed

B. Downshift after reducing speed

C. Downshift when the speed is excessively low

D. Downshift to the fullest extent

Answer: A

12. Keep enough safe distance When a motor vehicle follows another vehicle, because ______.

A. Avoke a rear-end collision

B. The closer you get to the vehicle, the less easy it is to grasp the situation ahead of the vehicle.

C. Enough distance to avoid emergencies

D. Prevent being unable to detect the front vehicle brake in time due to the damage rear lamp of the front vehicle

Answer: ABCD

13. In which of the following ways can motor vehicles avoid a tire burst?

A. Lowering tire pressure

B. Checking tires regularly

C. Removing foreign matters from the tire tread grooves timely

D. Replacing the tires that have cracks or deep cuts

Answer: BCD

14. When the driver discovers a tire is leaking and steers the vehicle off the main driving lane, he/she should refrain from applying emergency braking so as to avoid a vehicle turnover or a rear-end collision arising from the late braking of the vehicle behind.

A. Right

B. Wrong

Answer: A

15. What is the meaning of this sign?

A. No entering the intersection

B. No right turn

C. No changing lane

D. No U turn

Answer: B

16. When using splints, sticks or tree branches to keep the unexposed bones in position, it is necessary that these things should exceed the upper and lower joints of the wound.

A. Right

B. Wrong

Answer: A

17. Which lamp should be used when motor vehicles pass hrough an intersection at night where there is no traffic light signal?

A. High-beam

B. Low-beam

C. Hazard lamps

D. High-beam and low-beam should be used alternatively

Answer: D

18. After a traffic accident, what is the most effective measure to prevent secondary accidents?

A. Evacuate all passengers

B. Turn on the hazard lamps

C. Mark the original place of the injured persons

D. Properly place the danger warning sign

Answer: ABD

19. When driving a motor vehicle near an intersection, the vehicle may speed up and honk to pass.

A. Right

B. Wrong

Answer: B

20. Whats the meaning of this sign?

A. Pass with low speed

B. Watch for pedestrians

C. On foot

D. Pedestrians go first

Answer: C

21. When a motor vehicle temporarily stops at night, which lamp should be turned on?

A. Front and rear fog lamp, clearance lamp and rear position lamp

B. Head lamp, clearance lamp and rear position lamp

C. Hazard lamp, clearance lamp and rear position lamp

D. Reverse lamp, clearance lamp and rear position lamp

Answer: C

22. Which measures is correct when a motor vehicle intends to overtake

A. After overtaking, turn on the right turning light and drive back to the original lane after the necessary safe distance has been pulled away by overtaking.

B. Overtaking from the left side of the previous car

C. After overtaking, turn on the right turn light and drive back to the original Lane immediately.

D. Overtake on the right side

Answer: AB

23. Which of the following is a basic requirement for rescuing the injured at the scene of a traffic accident?

A. Treat wounds first and safe life later

B. Save life first and treat wounds later

C. Help lightly wounded persons first

D. Help seriously wounded persons later

Answer: B

24. What is the meaning of this sign?

A. Steep downhill road

B. Continuous up slopes

C. Steep uphill road

D. Embankment road

Answer: C

25. Speed up and pass when encountering this traffic light at the intersection

A. Right

B. Wrong

Answer: B