承德摩托车驾照科目四考试英语试题

1. What is the meaning of this sign?

A. Going straight and right turn

B. Going straight and left turn

C. No going straight and no left turn

D. Right turn and left turn only

Answer: B

2. It is illegal to change lanes without turning on indicators.

A. Right

B. Wrong

Answer: A

3. When driving a motor vehicle crosses each other on a hump bridge, what should the driver do?

A. Rush to pass

B. Reduce speed

C. Honk to indicate the vehicle

D. Go on the right side

Answer: BCD

4. When finding a tire burst on the road, the driver should gently depress the brake pedal, reduce speed and stop the vehicle slowly.

A. Right

B. Wrong

Answer: A

5. When encountering this situation in a residential area, the driver may honk to urge them to yield.

A. Right

B. Wrong

Answer: B

6. What is the meaning of this sign?

A. Customs inspection

B. Stop-for-inspection

C. Frontier inspection

D. No passing

Answer: B

7. When following a vehicle on the road, the distance from the vehicle in front is not important. As long as the driver goes forward at the same speed as the vehicle in front does, he/she can avoid a rear-end collision.

A. Right

B. Wrong

Answer: B

8. What is the meaning of this sign?

A. Bypass from left side

B. Continuous curves

C. Sharp left curve

D. Sharp right curve

Answer: C

9. What is the meaning of this sign?

A. Reduce speed and go slowly

B. Watch for danger

C. Jammed section

D. Accident-prone section

Answer: B

10. When removing a wounded person suffering spinal fracture, the rescuer should never help the wounded person to walk. He may be carried away with a soft stretcher.

A. Right

B. Wrong

Answer: B

11. When passing a turn or a curve section, the driver should slow down and disengage the clutch.

A. Right

B. Wrong

Answer: B

12. Dangerous chemicals possess the characteristics of explosion, inflammation, poison, erosion and radiation.

A. Right

B. Wrong

Answer: A

13. Which of the following is a safe way for motor vehicles to pass the intersection marked with this sign?

A. Stop and observe the traffic situation around the intersection

B. Approach the intersection by speeding up

C. Observe the traffic situation on the left rear side

D. Approach the intersection at a reduced speed

Answer: D

14. When using emergency brake, be aware of keeping the body of the motorcycle being perpendicular to the ground to avoid sideslip.

A. Right

B. Wrong

Answer: A

15. Whats the meaning of the white horizontal solid line in the circle?

A. Turning waiting line

B. Deceleration line

C. Yielding line

D. Stop line

Answer: D

16. When running in a high speed, if only use the front brake, the driver can be easily thrown out due to the inertia.

A. Right

B. Wrong

Answer: A

17. What is the meaning of this sign?

A. Crosswalk lights

B. Watch for pedestrians

C. Attention to traffic lights

D. Intersection

Answer: C

18. Why is it dangerous to overtake on a snowy mud road in heavy snow?

A. Snow can increase tire adhesion

B. The flying mud made the sight bad.

C. Long braking distance in case of emergency

D. Pavement under snow and mud is easier to skid.

Answer: BCD

19. When driving motor vehicles on the uphill section of a mountain road, the driver should _____.

A. Always pay attention to downstream vehicles

B. Advance at a uniform speed.

C. Avoid shifting whenever possible

D. Choosing high speed gear

Answer: ABC

20. What is the meaning of this sign?

A. U turn

B. Reversing

C. Left turn

D. Bypassing

Answer: A

21. How will the adhesive force of road change when speed increases on a damp and slippery road?

A. Increase sharply

B. Increase gradually

C. Decrease sharply

D. No change

Answer: C

22. What is the meaning of this sign?

A. No U turn at intersection

B. No changing lane from both sides

C. No left or right turn

D. No going straight

Answer: C

23. When a motorcycle goes downhill on a mountain road, it is not allowed to overtake.

A. Right

B. Wrong

Answer: A

24. There is a risk of overtaking when driving a motor vehicle approaches the top of the slope on a mountainous road, because _____.

A. When approaching the top of the slope, the line of sight is blocked and it is impossible to observe the traffic situation.

B. When approaching the top of the slope, the line of sight is blocked. It is impossible to observe whether there are obstacles behind the top of the slope.

C. The speed is slower when approaching the top of the slope.

D. When approaching the top of the slope, the line of sight is blocked and the road direction behind the top of the slope can not be observed.

Answer: ABD

25. When approaching another vehicle at night, why should the driver alternate between high-and-low-beam at a distance more than 150 meters?

A. Warn each other before passing

B. Driving habit

C. Easy to observe the situation ahead from either side

D. Courtesy

Answer: C