九江摩托车英文驾考题库app手机版

1. How to pass through the unmanned level crossing without traffic lights?

A. properly reduce speed to pass

B. slide over in the neutral gear

C. stop to make sure it is safe, then pass

D. speed up and pass as fast as possible

Answer: C

2. What is the meaning of this sign?

A. electric bicycles may go

B. parking space for non-motorized vehicles

C. parking area for non-motorized vehicles

D. non-motorized vehicles may go

Answer: D

3. Max speed when pass the narrow road or brisge is _______

A. 50km/hr

B. 40km/hr

C. 30km/hr

D. 60km/hr

Answer: C

4. Before the motorized vehicle runs on the road, the driver should check the safety and technical performance of the vehicle.

A. Right

B. Wrong

Answer: A

5. What is the meaning of this sign?

A. no right turn

B. no U turn

C. no going straight

D. no left turn

Answer: C

6. What is the meaning of this sign?

A. muddy road

B. low-lying road

C. overflowing road

D. ferry

Answer: C

7. How to use lights when pulling over on road?

A. turn on the hazard lights

B. turn on the right-turn signal in advance

C. use the high and low beam lights alternately

D. not need to use any light to indicate

Answer: B

8. When driving on a rough road, the driver should use low gear to keep low speed; try to choose roads with big pits to reduce bumpy feeling.

A. Right

B. Wrong

Answer: B

9. When finding a tire burst on the road, the driver should gently depress the brake pedal, reduce speed and stop the vehicle slowly.

A. Right

B. Wrong

Answer: A

10. What is the meaning of this sign?

A. steep downhill road

B. continuous up slopes

C. steep uphill road

D. embankment road

Answer: C

11. The motorcycles should be inspected once every year when it exceeds ____ as from the date of registration.

A. 1 year

B. 2 years

C. 3 years

D. 4 years

Answer: D

12. Stopping temporarily on the road should not obstruct the passing of other vehicles and Pedestrians.

A. Right

B. Wrong

Answer: A

13. What is the meaning of this sign?

A. no stopping temporarily

B. no long stopping

C. no stopping

D. long stopping is allowed

Answer: B

14. When driving on road sections where safe sight distance is affected, such as the top of a ramp, what should drivers do to ensure safety?

A. Rush through

B. Use hazard lamp

C. Cut speed and sound the horn

D. Drive at will

Answer: C

15. What is the meaning of this sign?

A. Road narrows on both sides

B. Road narrows on the right side

C. Road narrows on the left side

D. Bridge narrows

Answer: B

16. Traffic Police can detain the vehicle according to law if the driver does not carry the ID card.

A. Right

B. Wrong

Answer: B

17. A motorized vehicle driver who uses falsified or altered driving license is subject to a 12-point penalty.

A. Right

B. Wrong

Answer: A

18. What is the meaning of this sign?

A. No passing

B. driving at reduced speed

C. time limit for entering

D. no entering

Answer: A

19. Before driving, it is necessary to check whether the cooling liquid, engine oil and fuel oil, are leaking.

A. Right

B. Wrong

Answer: A

20. When a motor vehicle stops in snow, which lamp should be turned on?

A. Front and rear fog lamps, clearance lamp and rear position lamp

B. Reverse lamp, clearance lamp and rear position lamp

C. Headlamp, clearance lamp and rear position lamp

D. Hazard lamps, clearance lamp and rear position lamp

Answer: D

21. When passing an intersection, vehicle motor drivers are not allowed to overtake.

A. Right

B. Wrong

Answer: A

22. What is the meaning of this sign?

A. U turn

B. reversing

C. left turn

D. bypassing

Answer: A

23. When the road maintenance vehicle and the engineering vehicle are on duty, the passing vehicles should avoid with care.

A. Right

B. Wrong

Answer: A

24. How to use lights when overtaking at night?

A. turn off the high beam light

B. turn on high beam lights

C. use fog lights

D. using the high and low beam lights alternately

Answer: D

25. How should lamps be used when a motor vehicle meets an oncoming bicycle on a narrow road or a narrow bridge at night?

A. Continuously change between low-beam and high-beam

B. Use clearance lamp

C. Use high-beam

D. Use low-beam

Answer: D