深圳摩托车科目四考试英文

1. When the tire pressure is too low, what can happen when driving at a high speed?

A. Tire pressure will be unstable

B. Tire pressure will increase

C. Driving resistance will decrease

D. The tire will burst

Answer: D

2. What is the meaning of this sign?

A. A manned level crossing

B. Multi-crossing of railway and road

C. Grade separation level crossing

D. An unmanned level crossing

Answer: A

3. When a motorcycle braking on a road covered by ice and snow, the driver should adopt point braking and prepare their feet for landing when braking.

A. Right

B. Wrong

Answer: A

4. What is the meaning of this sign?

A. The lane for non-motorized vehicles

B. Yield non-motorized vehicles

C. No passing for non-motorized vehicles

D. Watch for non-motorized vehicles

Answer: D

5. After setting off from the roadside, motor vehicle drivers should speed up as soon as possible and make a sharp left-turn in order to drive into the normal lane.

A. Right

B. Wrong

Answer: B

6. What is the meaning of this sign?

A. No going straight and no changing to left lane

B. No going straight and no left turn

C. Allowed to go straight and change to left lane

D. No going straight and no right turn

Answer: D

7. Which will affect the stopping distance?

A. Pavement conditions

B. Driver’s reaction time

C. The quantity of cargo and the structure of brake, etc.

D. The vehicle speed

Answer: ABCD

8. What is the meaning of this sign?

A. Road narrows on both sides

B. Road narrows on the right side

C. Road narrows on the left side

D. Bridge narrows

Answer: B

9. When the tire pressure is too low, what will happen if the tire changes its shape in waves and increases in temperature due to fast movement?

A. Unstable tire pressure

B. Even lower tire pressure

C. Driving resistance increases

D. Tire burst

Answer: D

10. How should lamps be used when a motor vehicle meets an oncoming bicycle on a narrow road or a narrow bridge at night?

A. Continuously change between low-beam and high-beam

B. Use clearance lamp

C. Use high-beam

D. Use low-beam

Answer: D

11. What is the meaning of this sign?

A. More vehicles section

B. Passing slowly

C. Jammed section

D. Construction section

Answer: B

12. When driving in icy and snowy weather, ________.

A. The tires can easily spin

B. The braking distance becomes longer

C. The tires can easily drift

D. Vehicle handling becomes more difficult

Answer: ABCD

13. Turning on the high-beam is an effective way to improve visibility in fog weather.

A. Right

B. Wrong

Answer: B

14. Dangerous chemicals possess the characteristics of explosion, inflammation, poison, erosion and radiation.

A. Right

B. Wrong

Answer: A

15. When encountering a school bus which stops at the right roadside and students are embarking or disembarking, what should motor vehicle drivers do?

A. If there is only one motor vehicle lane in each direction, motor vehicle drivers behind the bus should stop and wait.

B. If there are two motor vehicle lanes in each direction, motor vehicle drivers in the left lane behind the bus may overtake the bus at a lower speed

C. If there are three motor vehicle lanes in each direction, motor vehicle drivers in the middle lane behind the bus should stop and wait

D. If there are three motor vehicle lanes in each direction, motor vehicle drivers in the left lane behind the bus may pass at a lower speed

Answer: ACD

16. How will the adhesive force of road change when speed increases on a damp and slippery road?

A. Increase sharply

B. Increase gradually

C. Decrease sharply

D. No change

Answer: C

17. What is the meaning of this sign?

A. No changing lane

B. No left turn

C. No going straight

D. No U turn

Answer: D

18. Whats the meaning of the double white broken lines in far front of the intersection?

A. Waiting to run line

B. Stopping and yield line

C. Slowdown and yield line

D. Left-turn waiting line

Answer: C

19. It is unsafe to ride a motorcycle by high-heel shoes.

A. Right

B. Wrong

Answer: A

20. Which of the following is a safe way for motor vehicles to pass the intersection marked with this sign?

A. Stop and observe the traffic situation around the intersection

B. Approach the intersection by speeding up

C. Observe the traffic situation on the left rear side

D. Approach the intersection at a reduced speed

Answer: D

21. When a motor vehicle temporarily stops at night, which lamp should be turned on?

A. Front and rear fog lamp, clearance lamp and rear position lamp

B. Head lamp, clearance lamp and rear position lamp

C. Hazard lamp, clearance lamp and rear position lamp

D. Reverse lamp, clearance lamp and rear position lamp

Answer: C

22. What is the meaning of this sign?

A. Watch for long time honking

B. An unmanned level crossing

C. A manned level crossing

D. Multi-crossing of railway and road

Answer: B

23. Where should we choose to park?

A. Parking spaces on roads

B. Construction section

C. Crosswalk

D. Parking lot

Answer: AD

24. When the vehicles cross each other at night, what should the driver do if the vehicle coming in the opposite direction don’t turn off the high beam light?

A. Reduce speed for yield or stop on the right side.

B. Continuous change lights to remind the vehicle coming in the opposite direction

C. Turn on the high lights and force the coming car to change the lights

D. Move his sight to the right side to evade the light

Answer: ABC

25. When use the brake of a motorcycle, use the front-wheel brake first, then use the back-wheel brake.

A. Right

B. Wrong

Answer: B