铜仁摩托车科目四英文题库

1. How should lamps be used when a motor vehicle meets an oncoming bicycle on a narrow road or a narrow bridge at night?

A. Continuously change between low-beam and high-beam

B. Use clearance lamp

C. Use high-beam

D. Use low-beam

Answer: D

2. What is the meaning of this sign?

A. Slippery section

B. Sharp curve

C. Inverse curve

D. Continuous curves

Answer: C

3. What is the purpose of checking before driving?

A. Confirm whether the tyres of motor vehicles are damaged or not

B. Confirm whether there is a safety hazard near the vehicle.

C. Confirm whether there are obstacles around the vehicle

D. Confirm whether the road in front of the vehicle is safe

Answer: ABCD

4. When driving on a snowy day, drivers should follow the tracks on the road before them.

A. Right

B. Wrong

Answer: A

5. When driving in icy and snowy weather, because of the reduction of the stability, it is easy for the wheels to race or slip when rapidly speeding up.

A. Right

B. Wrong

Answer: A

6. When a motor vehicle encounters a burning phenomenon, it should leave the vehicle quickly so as not to cause injury or asphyxia to the respiratory tract.

A. Right

B. Wrong

Answer: A

7. When passing through a tunnel, the wrong measure is to ___________.

A. Keep safe distance when two vehicles cross each other

B. Driving with the low beam light

C. Use the hight beam light when two vehicles cross each other

D. Overtaking in the tunnel

Answer: CD

8. When driving in a heavy rain, drivers should contro their speed to prevent their vehicles from sliding.

A. Right

B. Wrong

Answer: A

9. When rescuing a wounded person who has been poisoned by toxic gas, the first measure is to send him/her to a place with fresh air so that he/she will not continue to be poisoned.

A. Right

B. Wrong

Answer: A

10. Drivers should wear shoes or boots, which have heels and not skid soles, to ensure the acute, accurate, and reliable gear-shifting by feet.

A. Right

B. Wrong

Answer: A

11. When driving a motor vehicle crosses each other on a hump bridge, what should the driver do?

A. Rush to pass

B. Reduce speed

C. Honk to indicate the vehicle

D. Go on the right side

Answer: BCD

12. When the tire pressure is too low, what can happen when driving at a high speed?

A. Tire pressure will be unstable

B. Tire pressure will increase

C. Driving resistance will decrease

D. The tire will burst

Answer: D

13. When use the brake of a motorcycle, use the front-wheel brake first, then use the back-wheel brake.

A. Right

B. Wrong

Answer: B

14. When encountering such pedestrians, motor vehicle drivers may continuously sound the horn to alert them to yield.

A. Right

B. Wrong

Answer: B

15. When approaching a vehicle on a narrow slope, which one of the following ways is correct?

A. The descending vehicle yields to the ascending

B. The vehicle which is further from the slope crest should yield

C. The ascending vehicle yields to the descending

D. If the descending vehicle has reached the midpoint while the ascending vehicle has not yet set out, the descending vehicle must yield.

Answer: A

16. What is the meaning of this sign?

A. Bump road

B. Low-lying road

C. High outburst road

D. Hump bridge

Answer: B

17. When a motor vehicle temporarily stops at night, which lamp should be turned on?

A. Front and rear fog lamp, clearance lamp and rear position lamp

B. Head lamp, clearance lamp and rear position lamp

C. Hazard lamp, clearance lamp and rear position lamp

D. Reverse lamp, clearance lamp and rear position lamp

Answer: C

18. How to do in this intersection?

A. Wait in the cross-hatched marking area

B. stop and wait outside the intersection

C. Follow the vehicle in front and pass

D. Wait inside the intersection

Answer: B

19. A driver should accelerate in advance to overtake then it is likely to meet with oncoming vehicles.

A. Right

B. Wrong

Answer: B

20. vehicles to pass an intersection marked with this sign?

A. Stopping and observing the traffic situation around the intersection

B. Approaching the intersection by speeding up

C. Approaching the intersection at a reduced speed

D. Observing the traffic situation on the left rear side

Answer: A

21. How to ensure motor vehicles have sufficient power when driving uphill?

A. Downshift before reducing speed

B. Downshift after reducing speed

C. Downshift when the speed is excessively low

D. Downshift to the fullest extent

Answer: A

22. When driving, the driver should yield to _______.

A. Ambulance

B. Fire engine

C. School bus

D. Police car

Answer: ABCD

23. Violent wind can cause a sideways swerve to a running vehicle.

A. Right

B. Wrong

Answer: A

24. The motorized vehicle driver may go through an intersection rapidly when there is no traffic signal

A. Right

B. Wrong

Answer: B

25. In such road sections, you can enter the cross-hatched marking area to wait.

A. Right

B. Wrong

Answer: B