眉山摩托车理论考试英语

1. What is the max speed on muddy road?

A. 15km/hr

B. 20km/hr

C. 40km/hr

D. 30km/hr

Answer: D

2. Which lamp should be used when motor vehicles pass hrough an intersection at night where there is no traffic light signal?

A. High-beam

B. Low-beam

C. Hazard lamps

D. High-beam and low-beam should be used alternatively

Answer: D

3. When a fast-running vehicle makes a sharp turn, it can very easily cause side collision or an overturn due to the centrifugal force.

A. Right

B. Wrong

Answer: A

4. Before the motorized vehicle runs on the road, the driver should check the safety and technical performance of the vehicle.

A. Right

B. Wrong

Answer: A

5. How to reduce speed or stop when driving on a road covered with snow and ice?

A. Take full advantage of driving brake

B. Take full advantage of the control power from engine

C. Take full advantage of parking brake

D. Take full advantage of speed retarder

Answer: B

6. What is the meaning of this sign?

A. watch for long time honking

B. an unmanned level crossing

C. a manned level crossing

D. multi-crossing of railway and road

Answer: B

7. Drivers should wear shoes or boots, which have heels and not skid soles, to ensure the acute, accurate, and reliable gear-shifting by feet.

A. Right

B. Wrong

Answer: A

8. What is the meaning of this sign?

A. no borrowing lane

B. no changing lane

C. no overtaking

D. no U turn

Answer: C

9. When a motor vehicle temporarily stops at night, which lamp should be turned on?

A. Front and rear fog lamp, clearance lamp and rear position lamp

B. Head lamp, clearance lamp and rear position lamp

C. Hazard lamp, clearance lamp and rear position lamp

D. Reverse lamp, clearance lamp and rear position lamp

Answer: C

10. When a motor vehicle temporarily stops in fog, which lamp should be turned on?

A. Hazard lamp, clearance lamp and rear position lamp

B. Left-turn indicator, clearance lamp and rear position amp

C. Headlamp, clearance lamp and rear position lamp

D. Reverse lamp, clearance lamp and rear position lamp

Answer: A

11. How to use lights when overtaking at night?

A. turn off the high beam light

B. turn on high beam lights

C. use fog lights

D. using the high and low beam lights alternately

Answer: D

12. After causing a road accident, the vehicle driver needs to change the scene for rescuing the wounded, the driver should mark the location.

A. Right

B. Wrong

Answer: A

13. People who take a two-wheeled motorcycle should ride it by side way.

A. Right

B. Wrong

Answer: B

14. When a motor vehicle moves through water, drivers should intermittently and gently depress the brake pedal in order to restore braking efficiency.

A. Right

B. Wrong

Answer: A

15. The police can detain the vehicle if one drives a vehicle without ______

A. vehicle license

B. ID card

C. pass paper

D. qualification certificate

Answer: A

16. When driving on a road covered with ice and snow, the motor vehicle may spin or slide when increasing the speed urgently, due to the loss of vehicle stability.

A. Right

B. Wrong

Answer: A

17. If a person who has caused a major traffic accident and if his act constitutes a crime, he should be held for _________.

A. criminal liability

B. civil liability

C. direct liability

D. economic liability

Answer: A

18. What is the meaning of this sign?

A. intersection

B. ring intersection

C. T-shaped intersection

D. Y-shaped intersection

Answer: A

19. What is the meaning of this sign?

A. turn left

B. no going straight

C. straight-going lane

D. one-way road

Answer: A

20. What is the meaning of this sign?

A. bypass from left side

B. continuous curves

C. sharp left curve

D. sharp right curve

Answer: C

21. When a motorized vehicle breaks down on the road and is difficult to move, the driver should place a warning sign within 50 meters behind the vehicle.

A. Right

B. Wrong

Answer: B

22. A motorized vehicle is not allowed to stop in the section 50 meters to the narrow road lessthan 4 meters width.

A. Right

B. Wrong

Answer: A

23. When crossing each other at night, how far should change the high beam lights to low beam lights?

A. not need to change lights

B. beyond 150m

C. within 100m

D. within 50m

Answer: B

24. What is the meaning of this sign?

A. no entry for bicycles

B. lane for non-motorized vehicles

C. special lane for bicycles

D. bicycle stopping area

Answer: B

25. What is the meaning of this sign?

A. reducing speed 40m ahead

B. minimum speed is 40km/hr

C. axle weight limit is 40 tons

D. maximum speed limit is 40km/hr

Answer: D