河源摩托车科目四考试英文

1. How to drive a car safely when the sight of rain, snow, fog is not clear or the road is slippery?

A. Increase the horizontal distance

B. Reduce speed and run

C. Speed up and run

D. Stop to yield when necessary

Answer: ABD

2. When a tire blowout on the road, the driver should swiftly depress the brake pedal to reduce speed, do all his can to control the steering wheel and stop the vehicle as soon as possible.

A. Right

B. Wrong

Answer: B

3. When driving, besides paying attention to keeping a safe distance from the vehicle in front, drivers should also be prudent when braking so as to avoid a rear-end collision caused by a vehicle behind.

A. Right

B. Wrong

Answer: A

4. When driving in icy and snowy weather, because of the reduction of the stability, it is easy for the wheels to race or slip when rapidly speeding up.

A. Right

B. Wrong

Answer: A

5. Speed up and pass when encountering this traffic light at the intersection

A. Right

B. Wrong

Answer: B

6. How will the adhesive force of road change when speed increases on a damp and slippery road?

A. Increase sharply

B. Increase gradually

C. Decrease sharply

D. No change

Answer: C

7. When a motor vehicle reaches a muddy or burst-and-muddy section of the road, the driver should stop, observe and select a level and solid section or a section with vehicle tracks.

A. Right

B. Wrong

Answer: A

8. When following a vehicle on the road, the distance from the vehicle in front is not important. As long as the driver goes forward at the same speed as the vehicle in front does, he/she can avoid a rear-end collision.

A. Right

B. Wrong

Answer: B

9. When encountering pedestrians slowly cross the road in a residential area, the driver should sound the horn continuously.

A. Right

B. Wrong

Answer: B

10. In which of the following ways can motor vehicles avoid a tire burst?

A. Lowering tire pressure

B. Checking tires regularly

C. Removing foreign matters from the tire tread grooves timely

D. Replacing the tires that have cracks or deep cuts

Answer: BCD

11. Where can not park?

A. Parking lot

B. Parking spaces on roads

C. Landslide and debris flow in Mountainous Areas

D. Crosswalk

Answer: CD

12. What is the meaning of this sign?

A. Slippery section

B. Sharp curve

C. Inverse curve

D. Continuous curves

Answer: D

13. What is the meaning of this sign?

A. Continuous down slopes

B. Steep downhill road

C. Steep uphill road

D. Continuous up slopes

Answer: A

14. How should the driver pass this place safely?

A. Speed up and pass in the front of the pedestrians

B. Bypass behind the pedestrians

C. Slow down and sound the horn

D. Stop and wait until the pedestrians pass

Answer: D

15. What is the meaning of this sign?

A. Crosswalk lights

B. Watch for pedestrians

C. Attention to traffic lights

D. Intersection

Answer: C

16. When such circumstances happen suddenly, what should the driver do?

A. Reduce speed or stop to yield

B. Bypass in front of the pedestrians

C. Continuously sound the horn to alert the pedestrians

D. Bypass from behind the pedestrians

Answer: A

17. When driving on road sections where safe sight distance is affected, such as the top of a ramp, what should drivers do to ensure safety?

A. Rush through

B. Use hazard lamp

C. Cut speed and sound the horn

D. Drive at will

Answer: C

18. Before driving, it is necessary to check whether the cooling liquid, engine oil and fuel oil, are leaking.

A. Right

B. Wrong

Answer: A

19. A motorcycle is not permitted to tow other vehicles or to be towed by other vehicles.

A. Right

B. Wrong

Answer: A

20. A light motorcycle is only permitted to carry preschoolers.

A. Right

B. Wrong

Answer: B

21. What is the meaning of this sign?

A. Going straight and left turn

B. Going straight and right turn

C. No going straight and no right turn

D. Left turn and right turn only

Answer: B

22. When a motorcycle goes down a long slope, it should run at a lower gear and fully use the engine to brake.

A. Right

B. Wrong

Answer: A

23. When a motor vehicle passes over an inundated road drivers should change to a high gear and pass rapidly.

A. Right

B. Wrong

Answer: B

24. How should lamps be used when a motor vehicle meets an oncoming bicycle on a narrow road or a narrow bridge at night?

A. Continuously change between low-beam and high-beam

B. Use clearance lamp

C. Use high-beam

D. Use low-beam

Answer: D

25. A driver should accelerate in advance to overtake then it is likely to meet with oncoming vehicles.

A. Right

B. Wrong

Answer: B