保定英文驾考科目一资料

1. What device does the switch of this symbol control?

A. the windscreen wiper and washer

B. the rear window defrosting or defogging

C. the rear window wiper and washer

D. the windscreen defrosting or defogging

Answer: C

2. Whats the meaning of this sign?

A. No passing

B. driving at reduced speed

C. time limit for entering

D. no entering

Answer: A

3. This sign reminds bump road ahead which may causes bump phenomenon.

A. Right

B. Wrong

Answer: A

4. It lights to indicate that ______

A. left-turn signal flashes

B. front and rear width lights light on

C. front and rear width lights light on

D. right-turn signal flashes

Answer: A

5. Whats the meaning of this sign?

A. right-turn lane

B. U turn lane

C. left-turn lane

D. lanes for going in different directions

Answer: C

6. Going though the intersection according to the traffic lights when traffic lights and command of the traffic police are inconsistency.

A. Right

B. Wrong

Answer: B

7. Whats the meaning of this guide arrow on the road?

A. left curve or need to bypass from left side ahead

B. merge with the left flow due to obstacle ahead

C. right curve or need to merge with the right flow ahead

D. left curve or need to merge with the left flow ahead

Answer: C

8. When a vehicle passes a tunnel, it is prohibited from overtaking.

A. Right

B. Wrong

Answer: A

9. This sign means the opposite vehicle should stop to yield when crossing each other.

A. Right

B. Wrong

Answer: B

10. Rear fog light lights when the light switch is at this position.

A. Right

B. Wrong

Answer: A

11. Whats the meaning of this sign?

A. going straight and turning left

B. going straight and turning right

C. going straight and turning right at an interchange

D. going straight and turning left at an interchange

Answer: C

12. How to use light in this situation at the intersection?

A. turn off high beam lights

B. use hazard lights

C. use the high and low beam lights alternately

D. use high beam lights

Answer: C

13. After a vehicle enters a mountain road, it should pay special attention to the continuous curves sign. In addition, it should voluntarily evade vehicles and pedestrians, reduce speed in a time manner and honk in advance.

A. Right

B. Wrong

Answer: A

14. How far away should the warning sign be placed in the coming direction when this vehicle breaks down and stops temporarily on the expressway?

A. beyond 150m

B. 50~150m

C. within 50m

D. 50~100m

Answer: A

15. Steering wheel will be locked if removing the key while the ignition switch is in the LOCK position.

A. Right

B. Wrong

Answer: A

16. When a vehicle passes a level crossing, the driver should use the low gear to pass and should not change gear halfway in order to avoid engine kill.

A. Right

B. Wrong

Answer: A

17. The cycle for recording the accumulated penalty points for violating road traffic safety regulations is ____________.

A. 12 months

B. 24 months

C. 3 months

D. 6 months

Answer: A

18. These signs warn the driver danger ahead and passing with care.

A. Right

B. Wrong

Answer: A

19. Do not hang or place articles close to the front and rear windows that block the vision of the driver.

A. Right

B. Wrong

Answer: A

20. This sign reminds an unmanned level crossing ahead.

A. Right

B. Wrong

Answer: A

21. When a vehicle passes a narrow road or bridge, it is prohibited from overtaking.

A. Right

B. Wrong

Answer: A

22. When driving at night on a road with no or poor lighting, the driver should switch from the low beam light to the high beam light. But the vehicle following in the same direction is not allowed to use the high beam light.

A. Right

B. Wrong

Answer: A

23. Can leave the expressway into the ramp from this location directly.

A. Right

B. Wrong

Answer: B

24. Whats the meaning of this sign?

A. turn left

B. no going straight

C. straight-going lane

D. one-way road

Answer: A

25. What should a motorized vehicle has while running on the road?

A. a label of keeping distance

B. a label of reminding danger

C. a label of inspection

D. a label of product qualification

Answer: C