凉山州科目四英文考试

1. What should the driver do in this situation?

A. Speed up and overtake from the left side

B. Sound the horn continuously to warn the bicycle

C. Follow the bicycle closely

D. Slow down and yield to the bicycle

Answer: D

2. When approaching another vehicle at night, why should the driver alternate between high-and-low-beam at a distance more than 150 meters?

A. Warn each other before passing

B. Driving habit

C. Easy to observe the situation ahead from either side

D. Courtesy

Answer: C

3. Which lamp should be used when motor vehicles pass through an intersection at night where there is no traffic light signal?

A. High-beam

B. Low-beam

C. Hazard lamps

D. High-beam and low-beam should be used alternatively

Answer: D

4. The diamond-shaped broken line warns that drivers should drive at a lower speed on the road sections ahead.

A. Right

B. Wrong

Answer: A

5. What should the driver do if he encounters this situation at the intersection when driving straight?

A. Sound the horn to warn the other vehicle to yield

B. Speed up and pass in the front of the vehicle

C. Turn on the headlamp to warn the other vehicle to yield

D. Slow down or stop to yield

Answer: D

6. At this intersection, motor vehicle drivers may directly make a U-turn along the U-turn turning lane.

A. Right

B. Wrong

Answer: B

7. The motor vehicle may promptly overtake the vehicle in front from the left side in this situation.

A. Right

B. Wrong

Answer: B

8. Which of the following is a bad driving habit when the vehicle in front is moving slowly in a queue?

A. Cutting in and rushing to pass

B. Not overtaking other vehicles forcefully

C. Stop or pass alternatively

D. Do not occupy on a non-motor vehicle lane

Answer: A

9. The road marker indicates that vehicles are only allowed to turn right at the intersection ahead.

A. Right

B. Wrong

Answer: B

10. The sign on the left warns of no passing on the right-hand road ahead.

A. Right

B. Wrong

Answer: B

11. Which one of the following measures is correct when a motor vehicle intends to overtake but the vehicle in front refuses to yield?

A. Use a long-sounding horn

B. Follow the vehicle in front while turning high-beam

C. Wait for it to yield while keeping a safe distance

D. Use high-beam and low-beam alternatively

Answer: C

12. The sign on the right warns of a hump bridge right ahead.

A. Right

B. Wrong

Answer: B

13. The guide arrow on the road surface of this lane indicates that only left turns are permitted at the intersection ahead.

A. Right

B. Wrong

Answer: B

14. How to run when encountering this situation at the intersection?

A. stop and wait

B. obey the traffic lights

C. run straight on the right side

D. may turn right

Answer: A

15. Under such circumstances, motor vehicle drivers should bypass on the left quickly.

A. Right

B. Wrong

Answer: B

16. The sign on the right indicates a passing bay ahead.

A. Right

B. Wrong

Answer: A

17. A motor vehicle should not pass the level crossing rapidly in this situation.

A. Right

B. Wrong

Answer: A

18. Those traffic police signals mean turning right.

A. Right

B. Wrong

Answer: B

19. How should the driver pass this place safely?

A. Speed up and pass in the front of the pedestrians

B. Bypass behind the pedestrians

C. Slow down and sound the horn

D. Stop and wait until the pedestrians pass

Answer: D

20. Motor vehicle drivers are allowed to overtake on this road section.

A. Right

B. Wrong

Answer: B

21. Crossing the broken white line on the right edge of the road is allowed.

A. Right

B. Wrong

Answer: A

22. Motor vehicles are prohibited from turning left in this situation.

A. Right

B. Wrong

Answer: A

23. The sign on the right warns drivers to yield for oncoming motor vehicles.

A. Right

B. Wrong

Answer: B

24. When entering an expressway ramp, which of the following statements is correct?

A. Drivers are allowed to overtake other vehicles

B. Drivers are prohibited from making U-turns

C. Drivers are allowed to stop

D. Drivers are allowed to reverse

Answer: B

25. In this driving condition, drivers should turn on the high-beam when setting off.

A. Right

B. Wrong

Answer: B