海西驾考英文版手机版

1. When encountering a vehicle in the opposite direction forcing its way by using his lane, the driver should __________.

A. Force the other side to drive by the right side

B. Use the high beam light to warn the other side

C. Voluntarily yield to the other side

D. Go ahead by the center of the road

Answer: C

2. How to use light in this situation at the intersection?

A. turn off high beam lights

B. use hazard lights

C. use the high and low beam lights alternately

D. use high beam lights

Answer: C

3. You can overtake from both sides in this case.

A. Right

B. Wrong

Answer: B

4. Which part does this switch control?

A. windscreen defogger

B. windscreen wiper

C. the hazard lights

D. devices of lights and signals

Answer: B

5. Before a vehicle enters an intersection, the driver should reduce speed, observe and make sure it is safe to do so.

A. Right

B. Wrong

Answer: A

6. 7.When a vehicle changes lane before an intersection, the driver should do so ______.

A. In the area marked by solid lines before the intersection

B. In the area marked by solid lines in the intersection

C. In the area marked by broken lines as indicated by the guide arrow

D. Before the stop line at the intersection

Answer: C

7. The braking system may malfunction if it lights.

A. Right

B. Wrong

Answer: A

8. Whats the meaning of this guide arrow?

A. no passing

B. driving lane

C. merging

D. going straight

Answer: D

9. Whats the meaning of this sign?

A. crosswalk lights

B. watch for pedestrians

C. attention to traffic lights

D. intersection

Answer: C

10. Whats the meaning of the marking in the red circle?

A. temporary stopping

B. bay-stopping

C. emergency stopping

D. public bus station

Answer: B

11. What marking is the white polylines in the circle?

A. ascertaining the distance between the vehicles

B. driving at reduced speed

C. ascertaining the speed of the vehicles

D. reducing the speed at the intersection

Answer: A

12. When a vehicle reaches a muddy or burst-and-muddy section, the driver should stop,observe and select the level and solid section or the section with vehicle tracks.

A. Right

B. Wrong

Answer: A

13. When bicycles ahead obstruct the traffic flow, the driver may honk to remind them,speed up and bypass.

A. Right

B. Wrong

Answer: B

14. A motorized vehicle is not allowed to stop in the section within

A. 5m

B. 10m

C. 50m

D. 30m

Answer: C

15. It flashes when turning on the hazard lights.

A. Right

B. Wrong

Answer: A

16. Whats the meaning of this sign?

A. lane for both going straight and U turn

B. lane for both going straight and left turn

C. lane for going straight and right turn

D. lanes for going in different directions

Answer: B

17. Whats the meaning of this sign?

A. 3m width limit ahead

B. 3m width limit

C. the 3m width limit ban is lifted

D. 3m height limit

Answer: B

18. Traffic Police can detain the vehicle according to law if the driver does not carry the IDcard.

A. Right

B. Wrong

Answer: B

19. May watch car video in good road conditions.

A. Right

B. Wrong

Answer: B

20. May turn right when encountering this traffic light at the intersection.

A. Right

B. Wrong

Answer: A

21. Use the high and low beam lights alternately when passing the crosswalk at night.

A. Right

B. Wrong

Answer: A

22. Driving a small passenger vehicle at 100km/hr on the expressway, the minimum distance from the vehicle in front is _____ .

A. not less than 20 meters

B. not less than 10 meters

C. not less than 50 meters

D. not less than 30 meters

Answer: C

23. This sign reminds a sharp curve ahead.

A. Right

B. Wrong

Answer: B

24. Whats the meaning of this sign?

A. slippery section

B. sharp curve

C. test driving section

D. curve section

Answer: A

25. When a vehicle passes a level crossing, the driver should use the low gear to pass and should not change gear halfway in order to avoid engine kill.

A. Right

B. Wrong

Answer: A