苏州2025科目一考试英文版

1. How to use lights in this weather condition?

A. use high beam lights

B. use fog lights

C. not use any light

D. turn on the right-turn signal

Answer: B

2. Whats the meaning of this sign?

A. landslide section

B. construction section

C. factory ahead

D. jammed road

Answer: B

3. After starting the engine, it lights to indicate that ______

A. fuel pump abnormal or malfunction

B. ignition system malfunction

C. fuel supply system is abnormal

D. fuel in tank reaches the minimum level

Answer: D

4. Whats the meaning of this sign?

A. reduce speed in tunnel

B. turn on the high beam lights in tunnel

C. turn on the light in tunnel

D. width light in tunnel

Answer: C

5. The behavior of a motorized vehicle driver who has violated the law and regulations on road traffic safety is _______ .

A. faulty act

B. violation of regulations

C. rule-breaking act

D. violation of law

Answer: D

6. What is this traffic sign?

A. Road narrows on both sides

B. Road narrows on the right side

C. Road narrows on the left side

D. Bridge narrows

Answer: A

7. It lights to indicate that ______

A. the head and tail fog lights are turned on

B. front and rear width lights are turned on

C. the head lights are turned on

D. the hazard lights are turned on

Answer: B

8. Whats the meaning of this sign?

A. expressway parking area ahead

B. expressway shelter ahead

C. expressway car park ahead

D. expressway service area ahead

Answer: A

9. What is the max speed when passing a level crossing?

A. 15km/hr

B. 20km/hr

C. 30km/hr

D. 40km/hr

Answer: C

10. The safety pillow is used to protect the driver‘s head when there is a rear-end collision.

A. Right

B. Wrong

Answer: B

11. Can leave the expressway into the ramp from this location directly.

A. Right

B. Wrong

Answer: B

12. Before entering a level crossing, the vehicle should reduce speed and change to a lower gear, and _____ after entering the level crossing.

A. Cannot change gear

B. Can change gear

C. Can change to a higher gear

D. Stop and look

Answer: A

13. A driver applies for the driving license for the first time and is during the period of probation, he can drive a motorized vehicle on expressway alone.

A. Right

B. Wrong

Answer: B

14. When overtaking, the driver should ________ if the vehicle in front refuses to reduce speed or yield.

A. Follow closely and find chance to overtake again

B. Stop overtaking

C. Speed up and continue to overtake

D. Continuously honk and speed up to overtake

Answer: B

15. The validity of the driving license is divided into 6-year, 10-year and 20-year.

A. Right

B. Wrong

Answer: B

16. Traffic Police can detain the vehicle according to law if it uses other vehicles license plate and vehicle license.

A. Right

B. Wrong

Answer: A

17. Whats the meaning of this guide arrow?

A. no passing

B. driving lane

C. merging

D. going straight

Answer: D

18. This sign reminds an unmanned level crossing ahead.

A. Right

B. Wrong

Answer: B

19. Driving a motorized vehicle on the highway which has no central line, the maximum speed can not exceed 70 kilometers per hour.

A. Right

B. Wrong

Answer: B

20. When driving at night, the driver should try as much as possible to avoid overtaking. When he really needs to overtake, he may switch the high and low beam lights to alert the vehicle in front.

A. Right

B. Wrong

Answer: A

21. Whats the meaning of this sign?

A. T-shaped intersection

B. branching intersection

C. reduce speed to pass

D. dead-end road

Answer: D

22. When reaching a sharp curve, the driver should reduce speed and drive on the right side so as to avoid colliding with the vehicle crossing the central line of the curve in the opposite direction.

A. Right

B. Wrong

Answer: A

23. A driver may drive on the road a motorized vehicle overhauled which has reached the scraped standard.

A. Right

B. Wrong

Answer: B

24. Pass the crossing as fast as possible if there is a red light at the intersection of a road or a level crossing.

A. Right

B. Wrong

Answer: B

25. It lights to indicate that ______

A. charge current is too large

B. damaged battery

C. ammeter malfunction

D. charging circuit malfunction

Answer: D