喀什英文驾考

1. How to do when the vehicle breaks down on road and needs to stop to solve the problem?

A. stop in the middle of the road

B. stop the vehicle where will not interfere the traffic

C. turn on the low beam lights or fog lights

D. stop on the spot to solve the problem

Answer: B

2. Whats the meaning of this sign?

A. watch for animals

B. watch for wildlife

C. Wildlife Sanctuary

D. Large-scale farms

Answer: A

3. Max speed when pass the narrow road or bridge is _______

A. 50km/hr

B. 40km/hr

C. 30km/hr

D. 60km/hr

Answer: C

4. When driving in windy, rainy, snowy, foggy and other complex weather conditions, the driver should turn on the head light, honk continuously and overtake rapidly if the vehicle in front goes slowly.

A. Right

B. Wrong

Answer: B

5. No turning right when encountering this traffic light at the intersection.

A. Right

B. Wrong

Answer: B

6. When a motorized vehicle breaks down on the road and is difficult to move, the driver should place a warning sign within 50 meters behind the vehicle.

A. Right

B. Wrong

Answer: B

7. When the traffic conditions at an intersection are complicated, the driver should be patiently waiting instead of taking chance.

A. Right

B. Wrong

Answer: A

8. The validity of the driving license is divided into 6-year, 10-year and 20-year.

A. Right

B. Wrong

Answer: B

9. When the driver is suspected of drinking or drunk in a traffic accident, preserve the scene and immediately report to the police.

A. Right

B. Wrong

Answer: A

10. The passenger in the front seat does not need to buckle up when a motorized vehicle runs.

A. Right

B. Wrong

Answer: B

11. What pedal is it?

A. clutch pedal

B. brake pedal

C. handbrake

D. accelerator pedal

Answer: A

12. Illegally assembled motorized vehicle can be drived on road as long as it is thought to be safe.

A. Right

B. Wrong

Answer: B

13. It lights to indicate that ______

A. front and rear width lights light on

B. front and rear width lights light on

C. left-turn signal flashes

D. right-turn signal flashes

Answer: D

14. Whats the meaning of the white markings on the road?

A. road construction marking

B. horizontal deceleration marking

C. vertical deceleration marking

D. fewer lanes indication marking

Answer: B

15. The main impact of mountain roads on safe driving is _______.

A. The traffic conditions are boring

B. The slopes are long, the curves are sharp and visibility range is shorter.

C. The traffic flow is heavy

D. The road signs are fewer

Answer: B

16. Whats the meaning of this sign?

A. going straight and right turn

B. going straight and left turn

C. no going straight and no left turn

D. right turn and left turn only

Answer: B

17. What is the max speed on this city road?

A. 30km/hr

B. 40km/hr

C. 50km/hr

D. 70km/hr

Answer: C

18. Whats the meaning of this sign?

A. distance to a tourist area

B. direction of a tourist area

C. symbol of a tourist area

D. category of a tourist area

Answer: A

19. May stop temporarily in the lane for non-motorized vehicles in this section.

A. Right

B. Wrong

Answer: B

20. Motorized vehicles should pass the intersections according to the traffic signals.

A. Right

B. Wrong

Answer: A

21. A motorized vehicle driver who drives more than 50% faster than the prescribed speed limit is subject to a 12-point penalty.

A. Right

B. Wrong

Answer: A

22. Whats the meaning of the diamond broken lines on the road?

A. road construction marking

B. vertical deceleration marking

C. horizontal deceleration marking

D. fewer lanes indication marking

Answer: B

23. When a vehicle reaches a sharp curve, the driver should _______.

A. Brake suddenly and go slowly

B. Drive along the outer side of the curve

C. Fully reduce speed and drive on the right side

D. Go forward by borrowing the opposite lane

Answer: C

24. Whats the meaning of this sign?

A. special lane for large buses

B. special lane for public buses

C. special lane for Bus Rapid Transit System

D. special lane for multi-passenger vehicles

Answer: B

25. ABS system can maximize the braking efficiency when conducting _______

A. braking intermittently

B. braking continuously

C. applying emergency braking

D. gently depressing the brake pedal

Answer: C