济南英语科目四考试题库

1. Under such circumstances, what should be done by motor vehicle drivers in order to yield to the pedestrians politely?

A. Set off after pedestrians pass

B. Set off and bypass in front of the pedestrians

C. Sound the horn to warn the pedestrians to yield

D. Set off and approach the pedestrians slowly

Answer: A

2. The sign on the right indicates a left-turn bypass route at the intersection ahead.

A. Right

B. Wrong

Answer: A

3. When a motor vehicle passes over an overflowing bridge, what should the driver do after stopping and observing closely?

A. Change to a high gear and pass rapidly

B. Constantly observe the changes of the flow

C. Prepare to stop at any time

D. Change to a low gear and pass through at a constant speed

Answer: D

4. When encountering such a situation, the vehicles should cut speed or stop to yield as approaching each other.

A. Right

B. Wrong

Answer: A

5. Motor vehicles are prohibited from driving straight or turning left in this situation.

A. Right

B. Wrong

Answer: A

6. The sign on the right indicates a passing bay ahead.

A. Right

B. Wrong

Answer: A

7. The driver should yield to other non-motor vehicles when the motor vehicle turns right at this Intersection.

A. Right

B. Wrong

Answer: A

8. The sign on the right warns that the road will narrow over the next 5 kilometers.

A. Right

B. Wrong

Answer: A

9. As shown in the flash, what should the motor vehicle driver do when encountering this situation?

A. Reserve a safe crosswise distance and cut speed

B. Keep a normal speed

C. Use the emergency brake when approaching

D. Speed up and pass rapidly

Answer: A

10. When driving on an expressway in rain, the driver should slow down to avoid steering failure arising from water slide

A. Right

B. Wrong

Answer: A

11. As shown in the flash, the driver’s act is correct.

A. Right

B. Wrong

Answer: B

12. When a motor vehicle passes over an inundated road drivers should change to a high gear and pass rapidly.

A. Right

B. Wrong

Answer: B

13. What should be done first after getting into the vehicle?

A. Observe the surrounding traffic situation

B. No need to observe the traffic situation around

C. Open the door and get in directly

D. Take note of the weather

Answer: A

14. The sign on the right warns of a one-way tunnel ahead.

A. Right

B. Wrong

Answer: B

15. The cross-hatched marking indicates an area where vehicle drivers are allowed to stop and wait.

A. Right

B. Wrong

Answer: B

16. The cross-hatched marking indicates an area where vehicle drivers are not allowed to stop.

A. Right

B. Wrong

Answer: A

17. What is the most frequent problem for driving on a muddy road?

A. High resistance force

B. Sideways slide

C. The motor vehicle bumps

D. Steering failure

Answer: B

18. Turning on the high-beam is an effective way to improve visibility in fog weather.

A. Right

B. Wrong

Answer: B

19. When driving on a muddy road, what should drivers do to pass at an even speed without stopping?

A. Use the handbrake

B. Press the clutch pedal

C. Press the brake pedal

D. Use the accelerator pedal

Answer: D

20. When encountering such pedestrians, what should motor vehicle drivers do?

A. Go ahead along the middle line of the road

B. Continuously sound the horn

C. Speed up and overtake

D. Pay attention to the actions of such pedestrians

Answer: D

21. The sign on the right side indicates no entry for all vehicles.

A. Right

B. Wrong

Answer: A

22. Unless stopping due to obstacles or vehicle breakdown on an expressway, motor vehicles are not allowed to stop to pick up or drop off people or load and unload cargo.

A. Right

B. Wrong

Answer: A

23. The road marking on the right lane indicates that drivers may temporarily borrow the special lane for buses.

A. Right

B. Wrong

Answer: B

24. Drivers are allowed to cross the broken and solid white line on the road when changing lanes or pulling over.

A. Right

B. Wrong

Answer: A

25. How should lamps be used when a motor vehicle meets an oncoming bicycle on a narrow road or a narrow bridge at night?

A. Continuously change between low-beam and high-beam

B. Use clearance lamp

C. Use high-beam

D. Use low-beam

Answer: D