周口2026科目一考试英文版

1. When a vehicle enters a two-way tunnel, the driver should turn on ________.

A. The hazard lights

B. The high beam light

C. The fog light

D. The width light or the low beam light

Answer: D

2. How to do when encountering slow-moving vehicles in front?

A. follow the vehicles in front

B. occupy the opposite lane to overtake

C. borrow the lane from right side to overtake

D. overtake from both sides as will

Answer: A

3. The starter works when turning the ignition switch to the ACC position.

A. Right

B. Wrong

Answer: B

4. Whats the meaning of this guide arrow?

A. indicate going straight or turning right

B. indicate turning right or making a U turn

C. indicate going straight or changing to right lane

D. indicate going straight or making a U turn

Answer: A

5. It lights when turning on the front high beam lights.

A. Right

B. Wrong

Answer: B

6. How to do if there is a traffic jam in intersection?

A. borrow the opposite lane to pass

B. stop and wait outside the intersection

C. cut in the front vehicles to pass

D. enter the intersection and wait

Answer: B

7. When a vehicle passes a tunnel, it is prohibited from overtaking.

A. Right

B. Wrong

Answer: A

8. When a vehicle stops temporarily in a rainy day, the driver should turn on ______.

A. The head and tail fog lights

B. The hazard lights

C. The high beam light

D. The reverse light

Answer: B

9. Whats the meaning of this sign?

A. bus station of expressway

B. rest area of expressway

C. gasoline station of expressway

D. service area of expressway

Answer: C

10. These signs warn the driver danger ahead and passing with care.

A. Right

B. Wrong

Answer: A

11. Whats the meaning of this sign?

A. no passing for small vehicle

B. passing for small vehicle only

C. passing for motorized vehicle

D. no passing for small vehicle

Answer: C

12. What marking are the white serrated solid lines in the circle?

A. guide lane lines

B. direction guide line

C. variable guide lane line

D. one-way driving line

Answer: C

13. What marking is the road mark in the circle?

A. crosswalk line

B. slowdown and yield line

C. stopping and yield line

D. intersection signal line

Answer: A

14. How to use lights at this position?

A. turn on the right-turn signal

B. turn on the left-turn signal

C. turn on the hazard lights

D. turn on the head lights

Answer: B

15. A driver should drive the vehicles in accordance with the qualification listed on the driving license.

A. Right

B. Wrong

Answer: A

16. Whats the meaning of this sign?

A. flat intersection

B. flat ring intersection

C. attention to interactive intersection

D. attention to separate intersection

Answer: D

17. The driver who chases and races while driving on the road, and commits serious acts is subject to ______

A. a prison term of 6 months

B. a prison term of more than 1 year

C. a criminal restriction and a fine

D. a criminal detention and a fine

Answer: D

18. Whats the meaning of this sign?

A. U turn lane

B. bypassing lane

C. lanes for going in different directions

D. left-turn lane

Answer: A

19. Whats the meaning of this sign?

A. intersection

B. ring intersection

C. T-shaped intersection

D. Y-shaped intersection

Answer: A

20. The safety pillow is used to protect the driver‘s head when there is a rear-end collision.

A. Right

B. Wrong

Answer: B

21. What marking is the white polylines in the circle?

A. ascertaining the distance between the vehicles

B. driving at reduced speed

C. ascertaining the speed of the vehicles

D. reducing the speed at the intersection

Answer: A

22. Driving a motorized vehicle on the highway which has no central line, the maximum speed can not exceed 70 kilometers per hour.

A. Right

B. Wrong

Answer: B

23. After starting the engine, it lights to indicate that ______

A. engine main oil way blockage

B. engine oil pressure is too low

C. engine crankshaft box leaks

D. engine oil pressure is too high

Answer: B

24. The rear windshield defroster starts to work after pressing this switch.

A. Right

B. Wrong

Answer: B

25. Before entering a level crossing, the vehicle should reduce speed and change to a lower gear, and _____ after entering the level crossing.

A. Cannot change gear

B. Can change gear

C. Can change to a higher gear

D. Stop and look

Answer: A