榆林英文驾考科目一资料

1. This sign reminds strong side wind ahead.

A. Right

B. Wrong

Answer: A

2. What is this manipulation device?

A. the air throttle lever

B. the gear lever

C. the clutch lever

D. the handbrake

Answer: D

3. It displays the current engine speed is 6000 rev / min.

A. Right

B. Wrong

Answer: B

4. Whats the meaning of this sign?

A. driving at reduced speed in the section of 40 meters

B. minimum speed is 40km/hr

C. maximum speed is 40km/hr

D. 40km/hr speed limit ban is lifted

Answer: D

5. When overtaking, the driver should try his best to increase the horizontal distance and,when necessary, may cross the solid line to overtake.

A. Right

B. Wrong

Answer: B

6. Whats the meaning of this sign?

A. watch for pedestrians

B. crosswalk

C. village or town

D. primary school

Answer: C

7. After starting the engine, it lights to indicate that ______

A. engine main oil way blockage

B. engine oil pressure is too low

C. engine crankshaft box leaks

D. engine oil pressure is too high

Answer: B

8. What is the Minimum speed in this lane?

A. 100km/hr

B. 110km/hr

C. 60km/hr

D. 90km/hr

Answer: D

9. What does the traffic light mean?

A. speed up and turn left

B. no right turn

C. intersection warning

D. speed and run straight

Answer: C

10. The driving license will not be revoked if the person drives after drug taking and injection.

A. Right

B. Wrong

Answer: B

11. How to do first when encountering such kind of bridge?

A. maintain the speed and pass

B. speed up and pass as soon as possible

C. stop and observe

D. pass slowly

Answer: C

12. Whats the meaning of this sign?

A. watch for danger

B. bypass from right side

C. bypass from left side

D. one-way pass

Answer: C

13. Whats the meaning of this sign?

A. expressway public phone

B. expressway police phone

C. expressway emergency phone

D. expressway rescue phone

Answer: C

14. Whats the meaning of this sign?

A. a manned level crossing

B. multi-crossing of railway and road

C. grade separation level crossing

D. an unmanned level crossing

Answer: A

15. When a vehicle changes lane, the driver only needs to turn on the turn signal before rapidly entering the new lane.

A. Right

B. Wrong

Answer: B

16. When starting up a vehicle stopping at the roadside, the driver should first ________.

A. Depress the accelerator pedal and start

B. Honk

C. Increase engine rotation speed

D. Observe the conditions around the vehicles

Answer: D

17. Whats the meaning of this sign?

A. going straight and left turn

B. going straight and right turn

C. no going straight and no right turn

D. left turn and right turn only

Answer: B

18. What pedal is it?

A. clutch pedal

B. brake pedal

C. handbrake

D. accelerator pedal

Answer: A

19. If a small motor vehicle driver has assumed equal or main liability for a traffic accident causing human deaths, and his driving license has not been revoked, it shall be checked within 30 days after the end of the scoring cycle.

A. Right

B. Wrong

Answer: A

20. A driver applies for the driving license for the first time and is during the period of probation, he can drive a motorized vehicle on expressway alone.

A. Right

B. Wrong

Answer: B

21. When a motorized vehicle stops temporarily at the roadside, the driver ________.

A. Is not allowed to stop in the opposite direction or in parallel

B. May stop anyway he likes as long as it is convenient for him to get out

C. May stop the vehicle in the opposite direction

D. May stop the vehicle in parallel

Answer: A

22. How to run when encountering this situation?

A. speed up to enter the lane of either side

B. enter the right lane

C. reduce speed and enter the lane of either side

D. can not run in the lane of neither side

Answer: D

23. The starter works when turning the ignition switch to the ACC position.

A. Right

B. Wrong

Answer: B

24. When a vehicle goes downhill, it may fully use the neutral gear and slide.

A. Right

B. Wrong

Answer: B

25. It lights while driving to indicate that ______

A. engine temperature is too high

B. engine cooling system malfunction

C. engine lubrication system malfunction

D. engine temperature is too low

Answer: A