巴彦淖尔科目四模拟考试英文版

1. Motor vehicles are prohibited from turning left in this situation.

A. Right

B. Wrong

Answer: A

2. When a front tire bursts, after controlling the driving direction, what should be done by the driver in order to slow down and stop?

A. Immediately change to a high gear

B. Immediately change to a low gear

C. Immediately change to the neutral gear

D. Apply emergency braking

Answer: B

3. When there is a braking failure on a downhill road, if there is no other alternative, the driver may rub the vehicle body against the rocks and trees on roadside to force the vehicle to slow down and stop.

A. Right

B. Wrong

Answer: A

4. How many kinds of law-breaking acts are displayed in flash 8?

A. One

B. Two

C. Three

D. Four

Answer: B

5. The driver should pay attention to the left side when the motor vehicle passes this intersection.

A. Right

B. Wrong

Answer: B

6. Drivers may turn left when seeing these hand signals.

A. Right

B. Wrong

Answer: A

7. What should motor vehicle drivers do under such circumstances at night?

A. Turn off the headlamp when approaching

B. Use low-beam

C. Use high-beam

D. Turn off all lamps in advance

Answer: B

8. After a motor vehicle falls into water, the driver won’t be able to open the side doors or windows to escape until water nearly fills up the compartment.

A. Right

B. Wrong

Answer: A

9. What should the driver do when seeing these hand signals.

A. Stop and wait

B. Go straight and pass through the intersection

C. Turn right at the intersection

D. Turn left at the intersection

Answer: A

10. When approaching a sharp curve, motor vehicle drivers should reduce speed only after entering the curve.

A. Right

B. Wrong

Answer: B

11. When two vehicles approach each other on a foggy day, what is the best method of safe driving?

A. Turn on the high-beam

B. Slowdown and maintain a large safety distance

C. Turn on the low-beam

D. Turn on the fog lamp

Answer: B

12. How to ensure safe driving at night?

A. Drive at speed limit

B. Cut speed and drive carefully

C. Maintain the current speed

D. Drive above the speed limit

Answer: B

13. When encountering this situation, which of the following is the correct way to overtake other vehicles?

A. Turn on high-beam

B. Use high-beam and low-beam alternatively

C. Turn on low-beam

D. Turning on hazard lamp

Answer: B

14. What should be done by drivers in order to drive safely on the road in this condition?

A. Make a large turn on the left side of the road

B. Make a turn on the central line of the curve

C. Make a small turn on the right side of the road

D. Make a turn by borrowing the opposite lane

Answer: C

15. Motor vehicles on this kind of road are only allowed to overtake the vehicle in front from left.

A. Right

B. Wrong

Answer: A

16. When the vehicle behind gives a notice of overtaking at night, the vehicle in front should not yield blindly.

A. Right

B. Wrong

Answer: A

17. What should the driver do in this condition?

A. Go through normally on the right side

B. Sound the horn and speed up to go through the tunnel

C. Stop and yield to the oncoming vehicle

D. Turn on the headlamp to warn the oncoming vehicle to yield

Answer: C

18. When driving on a long downhill road, which is the best way to control driving speed?

A. Coast in neutral gear

B. Depress the clutch and coast

C. Use the engine to brake

D. Depress the brake pedal continuously

Answer: C

19. The motor vehicle should slow down and pass slowly in this situation.

A. Right

B. Wrong

Answer: A

20. The sign on the left indicates no U-turn at the intersection ahead.

A. Right

B. Wrong

Answer: A

21. The sign on the right indicates right-hand turn only.

A. Right

B. Wrong

Answer: A

22. This sign warns that the section ahead is under traffic monitoring.

A. Right

B. Wrong

Answer: A

23. How will the adhesive force of road change when speed increases on a damp and slippery road?

A. Increase sharply

B. Increase gradually

C. decrease sharply

D. No change

Answer: C

24. In which ones of the following ways can motor vehicle drivers effectively prevent braking failure?

A. Maintaining the braking system periodically

B. Checking the free brake pedal travel before driving

C. Using the braking system correctly to avoid brake-fade

D. For vehicles with hydraulic braking system, checking if the brake fluid leaks before driving

Answer: ABCD

25. The broken and solid white line on the road indicates that crossing is allowed on the solid line side.

A. Right

B. Wrong

Answer: B