阜阳驾考英语

1. How to use lights at night while crossing each other on narrow road or bridge?

A. turn off all the lights

B. turn on the low beam lights

C. turn off the head lights

D. turn on high beam lights

Answer: B

2. 7.When a vehicle changes lane before an intersection, the driver should do so ______.

A. In the area marked by solid lines before the intersection

B. In the area marked by solid lines in the intersection

C. In the area marked by broken lines as indicated by the guide arrow

D. Before the stop line at the intersection

Answer: C

3. Emergency braking on a road covered by ice and snow can easily cause side skidding. The driver should use the engine braking to reduce speed.

A. Right

B. Wrong

Answer: A

4. Speeding up to go though the intersection before the light turns to red in this case.

A. Right

B. Wrong

Answer: B

5. Whats the meaning of the white broken lines area on the far left side?

A. special lane for multi-passenger vehicles

B. special lane for small buses

C. special lane for taxis with no passenger

D. special lane for large buses

Answer: A

6. How to do when encountering this situation of waiting in line?

A. cross the solid line from left side to overtake

B. overtake from both sides as will

C. wait in line

D. borrow the lane from right side to overtake

Answer: C

7. May watch car video in good road conditions.

A. Right

B. Wrong

Answer: B

8. In this case, by the right side of the bus lane to overtake.

A. Right

B. Wrong

Answer: B

9. When a driver needs to borrow a lane to bypass an obstacle in front and a vehicle in the opposite direction is approaching the obstacle, the driver should ___________.

A. Reduce speed or stop and yield to the vehicle coming in the opposite direction

B. Speed up and bypass the obstacle in advance

C. Honk to indicate the vehicle in the opposite direction to yield

D. Rapidly occupy the lane and force the vehicle coming in the opposite direction to stop and yield

Answer: A

10. This sign reminds bump road ahead which may causes bump phenomenon.

A. Right

B. Wrong

Answer: A

11. When overtaking, the driver should ________ if the vehicle in front refuses to reduce speed or yield.

A. Follow closely and find chance to overtake again

B. Stop overtaking

C. Speed up and continue to overtake

D. Continuously honk and speed up to overtake

Answer: B

12. The continuously flashing yellow light is to warn that the driver should look and make sure it is safe to pass.

A. Right

B. Wrong

Answer: A

13. When overtaking, the driver should try his best to increase the horizontal distance and,when necessary, may cross the solid line to overtake.

A. Right

B. Wrong

Answer: B

14. At this position, the motorized vehicle can continue to go through if the front wheels have passed the stop line.

A. Right

B. Wrong

Answer: B

15. Nobody is allowed to drive a motorized vehicle that has safety hazards.

A. Right

B. Wrong

Answer: A

16. Whats the meaning of this sign?

A. T-shaped intersection ahead

B. road branching point ahead

C. Y-shaped intersection ahead

D. intersection ahead

Answer: A

17. When a vehicle passes a school or a residential area, the driver should observe the signs and markings, go slowly and refrain from honking.

A. Right

B. Wrong

Answer: A

18. Whats the meaning of this sign?

A. distance to a tourist area

B. category of a tourist area

C. direction of a tourist area

D. symbol of a tourist area

Answer: C

19. When encountering stopping in turn or slow-moving vehicles in front at an intersection where lanes are reduced, the motorized vehicle should _________.

A. enter the intersection from road shoulder by the right side of the vehicle in front

B. enter the intersection from the side of interspace

C. pass alternately with one vehicle each lane to enter the intersection

D. change to left lane and cut in to enter the intersection

Answer: C

20. When a motorized vehicle breaks down at night, and is difficult to move, the driver should turn on the hazard lights, the contour lights and the tail lights.

A. Right

B. Wrong

Answer: A

21. Whats the meaning of the white markings on the road?

A. road construction marking

B. horizontal deceleration marking

C. vertical deceleration marking

D. fewer lanes indication marking

Answer: B

22. When entering an expressway toll gate, the driver should select a gate where _______.

A. There are more vehicles

B. The red light is on

C. The green light is on

D. Service is temporarily suspended

Answer: C

23. You can overtake from both sides in this case.

A. Right

B. Wrong

Answer: B

24. In the course of making a U turn, the driver should strictly control the speed, carefully observe the road conditions before and behind the vehicle, and may advance or reverse only if it is safe to do so.

A. Right

B. Wrong

Answer: A

25. Whats the meaning of this sign?

A. national boundaries

B. border defense

C. boundaries

D. customs

Answer: D