崇左英文版驾校考试科目一

1. It lights when turning on the width light.

A. Right

B. Wrong

Answer: A

2. When the road maintenance vehicle and the engineering vehicle are on duty, the passing vehicles should avoid with care.

A. Right

B. Wrong

Answer: A

3. Whats the meaning of this sign?

A. recommended speed in unusual weather

B. minimum speed in unusual weather

C. average speed in unusual weather

D. maximum speed in unusual weather

Answer: A

4. When a motorized vehicle encounters the cut in by another vehicle in a roundabout, the driver may not evade as long as he has the right of way.

A. Right

B. Wrong

Answer: B

5. What device does the switch of this symbol control?

A. child safety lock

B. window glasses of both sides

C. electric door

D. door unlock

Answer: A

6. Whats the meaning of the white broken lines area on the far left side?

A. special lane for multi-passenger vehicles

B. special lane for small buses

C. special lane for taxis with no passenger

D. special lane for large buses

Answer: A

7. Whats the meaning of this sign?

A. bypass from left side

B. continuous curves

C. sharp left curve

D. sharp right curve

Answer: C

8. If a small motor vehicle driver has assumed equal or main liability for a traffic accident causing human deaths, and his driving license has not been revoked, it shall be checked within 30 days after the end of the scoring cycle.

A. Right

B. Wrong

Answer: A

9. What to do besides controlling speed less than 20km/hr when the visibility is lower than 50 meters on the expressway?

A. run in the emergency lane

B. leave the expressway as soon as possible

C. stop by the roadside as soon as possible

D. run slowly in the road shoulder

Answer: B

10. Before entering a level crossing, the vehicle should reduce speed and change to a lower gear, and _____ after entering the level crossing.

A. Cannot change gear

B. Can change gear

C. Can change to a higher gear

D. Stop and look

Answer: A

11. This sign warns the driver there have traffic lights ahead.

A. Right

B. Wrong

Answer: A

12. The oil pressure of engine may be too high if it lights.

A. Right

B. Wrong

Answer: B

13. It lights to remind that engine coolant may be insufficient.

A. Right

B. Wrong

Answer: A

14. How to pass this intersection?

A. not reduce speed to pass

B. speed up to pass as soon as possible

C. slide over in the neutral gear

D. reduce speed or stop to observe

Answer: D

15. Driving a motorized vehicle on the expressway is not allowed to exceed the marked maximum speed.

A. Right

B. Wrong

Answer: A

16. You can drive directly into the expressway from this position.

A. Right

B. Wrong

Answer: B

17. Before the motorized vehicle runs on the road, the driver should check the safety and technical performance of the vehicle.

A. Right

B. Wrong

Answer: A

18. When the driver senses a tire blowout on the road, he should control the direction of the vehicle, gently depress the brake pedal to slowly reduce the speed and gradually park the vehicle steadily on the roadside.

A. Right

B. Wrong

Answer: A

19. When a vehicle on the main road approaches a conjunction with a feeder road, the driver should ______ in order to prevent a collision with a vehicle that suddenly enters from the feeder road.

A. Maintain the normal speed

B. Reduce speed in advance, observe and drive with care

C. Honk and swiftly pass

D. Speed up in advance and pass

Answer: B

20. When a motorized vehicle passes through narrow road or bridge, the maximum speed should not exceed 30 kilometers per hour.

A. Right

B. Wrong

Answer: A

21. When a motorized vehicle breaks down at night, and is difficult to move, the driver should turn on the hazard lights, the contour lights and the tail lights.

A. Right

B. Wrong

Answer: A

22. What mark is the inclined yellow and black lines?

A. entity mark

B. protrusions mark

C. three-dimensional mark

D. deceleration mark

Answer: C

23. Whats the meaning of this sign?

A. reduce speed in tunnel

B. turn on the high beam lights in tunnel

C. turn on the light in tunnel

D. width light in tunnel

Answer: C

24. How to do while entering this intersection?

A. shift the high and low beam lights alternately to remind the cars already in the intersection to yield

B. quickly cut in the cars already in the intersection

C. let the cars already in the intersection go first

D. honk and enter directly

Answer: C

25. Whats the meaning of this figure mark on the road?

A. a mark of keeping distance

B. a mark of minimum distance

C. a mark of speed limit

D. a mark of road number

Answer: C