来宾驾校考试 英文

1. Driving across the double solid lines is _______

A. rule-breaking act

B. violation of law

C. faulty act

D. violation of regulations

Answer: B

2. This sign warns the driver there is school area ahead.

A. Right

B. Wrong

Answer: B

3. What marking are the white broken lines in the circles?

A. small vehicles turning lines

B. lane connection lines

C. non-motorized vehicles guide lines

D. intersection guide line

Answer: D

4. When a motorized vehicle runs in a foggy weather, the driver should turn on the fog light and the hazard lights.

A. Right

B. Wrong

Answer: A

5. Which kind of vehicle can be applied for when initially applying for the driving license?

A. midsize bus

B. large bus

C. ordinary motor tricycle

D. trailer

Answer: C

6. The age should be 18 ~ 70 years old when applying for the driving license of small vehicle or three-wheeled automobile.

A. Right

B. Wrong

Answer: A

7. As the braking distance increases on a wet road in a rainy day, the driver should use the emergency brake as much as possible to reduce speed.

A. Right

B. Wrong

Answer: B

8. You can make an U turn at this intersection.

A. Right

B. Wrong

Answer: B

9. How to do in this intersection?

A. wait in the cross-hatched marking area

B. stop and wait outside the intersection

C. follow the vehicle in front and pass

D. wait inside the intersection

Answer: B

10. Whats the meaning of the double white broken lines in far front of the intersection?

A. waiting to run line

B. stopping and yield line

C. slowdown and yield line

D. left-turn waiting line

Answer: C

11. Whats the meaning of the yellow broken and solid lines in the middle of the road?

A. no crossing the lines on the side of the broken line

B. no crossing the lines on the side of the solid line

C. allowed to cross the lines on the side of the solid line

D. allowed to cross the lines on both sides

Answer: B

12. When a vehicle on the main road approaches a conjunction with a feeder road, the driver should ______ in order to prevent a collision with a vehicle that suddenly enters from the feeder road.

A. Maintain the normal speed

B. Reduce speed in advance, observe and drive with care

C. Honk and swiftly pass

D. Speed up in advance and pass

Answer: B

13. Which part does it control when rotating this part of the switch?

A. the low beam lights

B. the head and tail fog lights

C. high beam lights

D. turn signals

Answer: B

14. When a vehicle passes a crosswalk, the driver should yield to the pedestrians.

A. Right

B. Wrong

Answer: A

15. It lights to remind that engine coolant may be insufficient.

A. Right

B. Wrong

Answer: A

16. Whats the meaning of this sign?

A. line guide signs

B. lane merging guide signs

C. lane branching guide signs

D. turning guide signs

Answer: A

17. Whats the meaning of the yellow slash filled area in the middle of the road?

A. one-way lanes dividing line

B. opposite direction lanes dividing line that can not be crossed

C. bilateral same direction lanes dividing line that can be crossed

D. opposite direction lanes dividing line that can be crossed

Answer: B

18. The vehicles are prohibited from passing when encountering this traffic light at the intersection.

A. Right

B. Wrong

Answer: B

19. When ignition switch is in the START position, the starter starts.

A. Right

B. Wrong

Answer: A

20. Whats the meaning of this sign?

A. turn left

B. no going straight

C. straight-going lane

D. one-way road

Answer: A

21. What marking is the combination of the white broken lines and the triangle area?

A. road entry marking

B. lane-dividing line that can be crossed

C. deceleration line at road entry

D. road exit marking

Answer: A

22. The validity of the Admission Form is _________

A. 1 year

B. 2 years

C. 3 years

D. 4 years

Answer: C

23. Whats the role of indicative sign?

A. tell the direction information

B. warn danger ahead

C. restrict the vehicles and pedestrians from passing

D. indicate the vehicles and pedestrians to go ahead

Answer: D

24. Whats the meaning of this sign?

A. continuous down slopes

B. steep downhill road

C. steep uphill road

D. continuous up slopes

Answer: A

25. When a vehicle passes a level crossing, the driver should use the low gear to pass and should not change gear halfway in order to avoid engine kill.

A. Right

B. Wrong

Answer: A