克孜勒苏州驾校模拟考试科目一英文版

1. Opening the doors of a motorized vehicle should not obstruct the flow of other vehicles and pedestrians.

A. Right

B. Wrong

Answer: A

2. What is the main role of the seat belt when there is a collision?

A. to protect the driver and passengers necks

B. to protect the driver and passengers chests

C. to reduce the injuries of the driver and passengers

D. to protect the driver and passengers waists

Answer: C

3. Whats the meaning of this sign?

A. township road No.

B. county road No.

C. provincial highway No.

D. national highway No.

Answer: D

4. The vehicle with ABS system can minimize the braking distance when driving on a road covered by ice and snow.

A. Right

B. Wrong

Answer: B

5. Whats the meaning of this sign?

A. dangerous hillside road

B. cliff section

C. watch for dropping stone

D. dangerous section

Answer: C

6. What kind of violation does this broken down vehicle have?

A. not turn on the hazard lights

B. not stop the car by the roadside

C. not solve the problem at once

D. not place the warning sign

Answer: D

7. The oil pressure of engine may be too high if it lights.

A. Right

B. Wrong

Answer: B

8. Before entering a level crossing, the vehicle should reduce speed and change to a lower gear, and _____ after entering the level crossing.

A. Cannot change gear

B. Can change gear

C. Can change to a higher gear

D. Stop and look

Answer: A

9. Whats the meaning of this sign?

A. uncovered car park

B. emergency stopping

C. parking space

D. passing bay

Answer: D

10. Whats the meaning of the yellow filled markings on the road?

A. closing to the obstacle

B. closing narrowed road

C. closing the moving obstacle

D. Marking of approaching a narrow road

Answer: A

11. What device does the switch of this symbol control?

A. the windscreen wiper and washer

B. the rear window defrosting or defogging

C. the rear window wiper and washer

D. the windscreen defrosting or defogging

Answer: C

12. How to use lights when pulling over on road?

A. turn on the hazard lights

B. turn on the right-turn signal in advance

C. use the high and low beam lights alternately

D. not need to use any light to indicate

Answer: B

13. What should the driver do when encountering a vehicle from the opposite direction on a road without a central line?

A. driving closely by the roadside

B. driving by the central of the road

C. reducing speed and driving by right side

D. run by using the lane for non-motorized vehicles

Answer: C

14. Whats the meaning of this sign?

A. a manned level crossing

B. multi-crossing of railway and road

C. grade separation level crossing

D. an unmanned level crossing

Answer: A

15. It displays that oil in tank has less than the warning line

A. Right

B. Wrong

Answer: A

16. How to run in this situation?

A. stop and yield to the opposite car

B. turn on the left-turn signal and run on the left side

C. turn on the head lights to let the other side yield

D. speed up to bypass the obstacle and then cross the other vehicle

Answer: A

17. This sign reminds overflowing road or overflowing bridge ahead.

A. Right

B. Wrong

Answer: A

18. It displays the current engine speed is 6000 rev / min.

A. Right

B. Wrong

Answer: B

19. When driving in a heavy rain, the driver should control the speed to avoid the danger arising from water slide.

A. Right

B. Wrong

Answer: A

20. This sign indicates indoor car park here.

A. Right

B. Wrong

Answer: B

21. When a vehicle changes lane, the driver should turn on the turn signal and rapidly enter the new lane.

A. Right

B. Wrong

Answer: B

22. Which kind of sign is it?

A. warning sign

B. prohibitive sign

C. indicative sign

D. directional sign

Answer: B

23. Driving a motorized vehicle on the road in violation of road traffic regulations shall be subject to relevant punishment.

A. Right

B. Wrong

Answer: A

24. What marking are the white serrated solid lines in the circle?

A. guide lane lines

B. direction guide line

C. variable guide lane line

D. one-way driving line

Answer: C

25. What is the role of ABS system when applying emergency braking?

A. cut off the power output

B. control the direction automatically

C. reduce braking inertia

D. prevent wheel blocking

Answer: D