鹤壁2026科目一考试英文

1. It lights when turning on the width light.

A. Right

B. Wrong

Answer: A

2. The continuously flashing yellow light is to warn that the driver should look and make sure it is safe to pass.

A. Right

B. Wrong

Answer: A

3. When a vehicle on the main road approaches a conjunction with a feeder road, the driver should ______ in order to prevent a collision with a vehicle that suddenly enters from the feeder road.

A. Maintain the normal speed

B. Reduce speed in advance, observe and drive with care

C. Honk and swiftly pass

D. Speed up in advance and pass

Answer: B

4. Driving motor vehicle with ABS system may occur side skidding when applying emergency braking.

A. Right

B. Wrong

Answer: A

5. When the tire pressure is too low, the fast-running tire can change its shape like waves and increase its temperature, which in turn can cause ________.

A. Even lower tire pressure

B. Increases resistance to the vehicle

C. Tire blowout

D. Unstable tire pressure

Answer: C

6. What kind of violation does this broken down vehicle have?

A. not turn on the hazard lights

B. not stop the car by the roadside

C. not solve the problem at once

D. not place the warning sign

Answer: D

7. Driving on the expressway with full signs and marking, the driver should run in the lane and at the speed according to _________.

A. Signs and markings

B. Rules on road traffic safety

C. Vehicle manual

D. Local regulations

Answer: A

8. What kind of violation does this vehicle on road have?

A. not hang the license plate as required

B. deliberately cover the license plate

C. occupy the lane for non-motorized vehicles

D. run in the opposite direction

Answer: B

9. When driving on a road covered by ice and snow, the driver must reduce speed and increase the safe distance.

A. Right

B. Wrong

Answer: A

10. When seeing a watch for children sign while driving, the driver should _______.

A. Speed up and pass

B. Bypass

C. Maintain the normal speed

D. Carefully select a speed

Answer: D

11. Continuously using the foot brake on a long downhill road ________.

A. Can shorten the engines service life

B. Increases the drivers labor intensity

C. Can drastically reduce the braking efficiency due to the rising temperature of the brake

D. Can easily cause vehicle overturn

Answer: C

12. What is the max speed on this expressway?

A. 110km/hr

B. 120km/hr

C. 90km/hr

D. 100km/hr

Answer: A

13. Whats the meaning of this sign?

A. provincial highway No.

B. county road No.

C. township road No.

D. national highway No.

Answer: C

14. A driver may drive on the road a motorized vehicle overhauled which has reached the scraped standard.

A. Right

B. Wrong

Answer: B

15. Driving a motorized vehicle on the road in violation of road traffic regulations shall be subject to relevant punishment.

A. Right

B. Wrong

Answer: A

16. Stopping the vehicle temporarily in the crosswalk is the act of violation of the law.

A. Right

B. Wrong

Answer: A

17. What marking is the road mark in the circle?

A. crosswalk line

B. slowdown and yield line

C. stopping and yield line

D. intersection signal line

Answer: A

18. What does this symbol indicate?

A. luggage compartment is opened

B. engine compartment is opened

C. cover of fuel tank is opened

D. door of one side is opened

Answer: B

19. Violating the law and regulations on road traffic safety is the act of violation of the law.

A. Right

B. Wrong

Answer: A

20. Whats the meaning of this sign?

A. township road No.

B. county road No.

C. provincial highway No.

D. national highway No.

Answer: D

21. How to pass when encountering this situation at the intersection?

A. make sure it is safe to pass

B. turn right and speed up to pass

C. speed up and pass straight

D. turn left and speed up to pass

Answer: A

22. Whats the meaning of this sign?

A. ring intersection ahead

B. intersection ahead

C. Y-shaped intersection ahead

D. T-shaped intersection ahead

Answer: C

23. The act of this small passenger vehicle to enter the expressway lane is correct.

A. Right

B. Wrong

Answer: B

24. How to use lights when pulling over on road?

A. turn on the hazard lights

B. turn on the right-turn signal in advance

C. use the high and low beam lights alternately

D. not need to use any light to indicate

Answer: B

25. When encountering non-motorized vehicles intending to bypass a stopping vehicle, the driver should ________.

A. Honk to indicate them to yield

B. Yield to them

C. Speed up and bypass

D. Follow them closely and honk

Answer: B