恩施驾考英文

1. Whats the meaning of this sign?

A. 3m width limit ahead

B. 3m width limit

C. the 3m width limit ban is lifted

D. 3m height limit

Answer: B

2. How to do in this intersection?

A. wait in the cross-hatched marking area

B. stop and wait outside the intersection

C. follow the vehicle in front and pass

D. wait inside the intersection

Answer: B

3. Driving a small passenger vehicle at 100km/hr on the expressway, the minimum distance from the vehicle in front is _____ .

A. not less than 20 meters

B. not less than 10 meters

C. not less than 50 meters

D. not less than 30 meters

Answer: C

4. The main impact of rainy weather on safe driving is _______.

A. The road is wet and slippery and the visibility is poor

B. The engine is prone to stop

C. The resistance to the vehicle increases

D. The electric equipment is prone to getting wet and causing short circuit

Answer: A

5. Which kind of vehicles are allowed to run in the lane with this marking on road?

A. public transport vehicles

B. private vehicles

C. taxis

D. official vehicles

Answer: A

6. A small bus driver should reduce speed rapidly when he suddenly feel bumpy on a flat expressway, to prevent tire blowout.

A. Right

B. Wrong

Answer: A

7. Whats the meaning of this sign?

A. watch for animals

B. watch for wildlife

C. Wildlife Sanctuary

D. Large-scale farms

Answer: A

8. A Social vehicle is not allowed to stop in the section 30 meters to the fire hydrant or the fire brigade (station).

A. Right

B. Wrong

Answer: A

9. Whats the meaning of this sign?

A. no borrowing lane

B. no changing lane

C. no overtaking

D. no U turn

Answer: C

10. Whats the meaning of this sign?

A. straight-going lane

B. going straight only

C. one-way road

D. no going straight

Answer: B

11. Whats the meaning of the double white solid lines in far front of the intersection?

A. stopping and yield line

B. slowdown and yield line

C. left-turn waiting line

D. waiting to run line

Answer: A

12. Whats the meaning of this sign?

A. downhill section on right side

B. driving by the right side of the road

C. stopping by the right side of the road

D. right turn only

Answer: B

13. When a vehicle enters a two-way tunnel, the driver should turn on ________.

A. The hazard lights

B. The high beam light

C. The fog light

D. The width light or the low beam light

Answer: D

14. Whats the meaning of this sign?

A. no yielding

B. yield while crossing each other

C. reduce speed and yield

D. stop to yield

Answer: C

15. The main impact of the road conditions at night on safe driving is ________.

A. The visibility is low and unfavorable for observing road traffic conditions

B. The road surface is complex and changing

C. The physical strength of the driver decreases

D. The driver can easily have impulse and illusion

Answer: A

16. May not turn on the turn signal when overtaking.

A. Right

B. Wrong

Answer: B

17. When a vehicle runs on an expressway, the driver may ascertain the speed according to his feeling.

A. Right

B. Wrong

Answer: B

18. When ignition switch is in the START position, the starter starts.

A. Right

B. Wrong

Answer: A

19. When the fire engine, ambulance and wrecker are executing an emergency task, other vehicles should yield.

A. Right

B. Wrong

Answer: A

20. The driver is prohibited from opening the door and letting passengers on and off when a vehicle has not come to a full stop.

A. Right

B. Wrong

Answer: A

21. Driving a motorized vehicle on the highway which has no central line, the maximum speed can not exceed 70 kilometers per hour.

A. Right

B. Wrong

Answer: B

22. When starting up a vehicle stopping at the roadside, the driver should first ________.

A. Depress the accelerator pedal and start

B. Honk

C. Increase engine rotation speed

D. Observe the conditions around the vehicles

Answer: D

23. Let the straight-going vehicle go first at this intersection.

A. Right

B. Wrong

Answer: A

24. No turning right when encountering this traffic light at the intersection.

A. Right

B. Wrong

Answer: B

25. ABS system can maximize the braking efficiency when conducting _______

A. braking intermittently

B. braking continuously

C. applying emergency braking

D. gently depressing the brake pedal

Answer: C